Search results for query: *

Yessir DS upper (see pic it's literally aligned with blower snout LOL) and PS lower for slants and many small blocks

Hey guys! Looks like this radiator will not allow fitment of my supercharger (yes I am finally installing my Aussiespeed kit!). It's a spectacular radiator, runs ice cold and fit great in my 65 Barracuda. This thing solved all my overheating issues from that shitty Champion radiator. If you...

Just had to spring for a starter so I don't think I can snag this today but as a sidenote, you can likely drop that in a USPS priority medium or large flat rate box with some padding, for $17-$22.

Direct fit on a 383 with stock iron heads?

Awesome Eaton blower kit, assembled for my slant six but after mock up found it set too high due to far outboard placement on my Hyper-Pak slant six. Would work better with short runner slant six or any V6/small V8 application. Includes: Blower (M90 draw-through) Custom 4bbl adapters top &...

Sorry I posted this in the wrong forum before the coffee kicked in

I've got some spares off my '65... stuff needs to go, seems I'm not gonna use it to build a truck-bed trailer like I'd wanted. Good clean 7.25 axle, stock, open, complete 4" bolt pattern. Some brake parts from the front end, plus 5 stock 13" wheels 4" bolt pattern (all have tires, some hold...

Upgraded to a hyper-pak on my car, I have two Cast iron intakes and one exhaust manifold. Exhaust Manifold has one crack on main forward log, easy weld/fix. Located in South Lake Tahoe CA (or meet in Carson NV). Intake manifold can be shipped for $25 Usps priority. Just looking for $20 per...

PM sent, thanks!

Got this as a test mule before my Pertronix III came for my 360. Run once for 2 mins, vacuum advance worked well. Will include free matching set of SB black wires (short, will hug block and valve covers with 90' plug ends). $65 shipped free in USA! Lose that ballast resistor! Pics from purchase...

All sold, guys, thanks!!

Hey yeah sorry dude!

Oh boy... I'd love to get that center section for my '51... dang. Hate to waste the housing etc.

Hey y'all! I have the following; 273 Adjustable rockers, in excellent condition, been cleaned up and ready for use. Recent/near new studs in them, Oil holes drilled cleaned etc. Also includes brand new COMP Cams brand pushrods (stock length) for use with hydraulic lifters! Rods were $70 alone...

All sold thanks guys!

Replied, thanks!

I have a nice 12" ProForm electric (pusher or puller, curved blades are reversible) fan, was used for about 200 miles until I went with their 15" shrouded fan on the rear instead. Cost me almost $90 from Tognotti's, I'll sell for $60 shipped free. Paypal only. Thanks! Pic for example, looks...

I have the above shackle kit, won't be using them anytime soon. $85 shipped free from Hercules, CA. Save about $20. Paypal only, thanks guys & gals! Specs from Summit: Shackles, Offset, 0.80 in. Wider, for Use with Offset Front Hangers, Dodge/Plymouth, A-Body, Kit Brand:Mopar Performance...

It's the complete Fitech inline fuel pump kit. This is new in box (onle opened to check fitment). I'm not gonna run it, my tank would need modification, so instead I'll pass it along to you guys! Save $75, I'll do $175 shipped in the US; It's about $250 shipped from Summit It will work with any...

Sorry dudes, buyer came and picked up last night. Thank you all! Also, my email notifications from FABO are not arriving when I get messages? I'll check my email filters. Sorry for delays!

To be clear, with FITech you don't need a 6AL or anything similar, as the FITech operates as the CDI or "brain" for the dizzy and handles everything, timing curve/retard and all. I don't know if a 6AL works with the FITech but I haven't seen it done...

Run for about 200 miles (absolute max) on the non-blower engine! Just installed new heads/intake/blower, not "running" the blower yet just bolted on getting belts and pulleys set up. Can't run it with boost until I swap in the new 2 wire dizzy next week and boy am I excited! Negotiable on price...

Hey folks! Have a good deal on a darn expensive dizzy. Powers my 378ci Small Block extremely well! I can't use this with my blower setup (FITech can only control their simpler 2-wire distributor for timing retard under boost) so I'm selling this to get the basic MSD dizzy, and now someone else's...

looking to sell my FCC and install an in-tank pump instead. These things are cool as heck... any takers at $325? Under 200 run miles, from a new fuel tank with new lines (cleanest run you'll ever get used). Would also maybe trade for a nice MSD Pro Billet distributor (not RTR kind) plus cash...

BUMP! THESE AREN'T 2.02 VALVE HEADS! Oops! Ready to run, I'll sell the lot for $325 obo :)

Emptied! Sorry :)

What are the port measurements to mate to the intake? I think this is the port-matched intake I need for my 51 w/ Performer RPM heads

BUMP! $425 gets you: Heads Intake Magnum exhaust manifolds Valve covers (OEM style) Dipstick & tube (brand new Moroso chrome!)

Will consider offers. Will take better pics if you need them haha...

I ran this rebuilt engine for a couple hundred miles, ran great. Mopar performance springs. See pics, super clean set. I'm bolting on Edelbrock heads and bigger intake so this set of big-valve heads and Torker 340 intake must go. Only flaw I could see, is a plugged (after being stripped) exhaust...