Search results for query: *

I think i have a good 3 speed setup that I could sell. Might even have correct electric washer bottle. I am not available to get to parts till Saturday

dash harness plug is the same for either switch. the configuration is different for each switch. all 3 speed motors used the electric washer so an extra wire comes through the bulkhead connector and the sinle wire then goes on the switch. I added a 3 speed motor to my 1970 Dart over 30 years...

looks like a 1970 tach one wire for power to fuse block and one wire through grommet in firewall to go to coil(-)

usually a bulb out.

there is additional wire that allows you to convert to electric washer and replace foot pump. brown wire from pump to bulkhead connector and brown wire from inside connector to the wiper switch. this feature only available for 3 speed wiper motor. great feature when my Dart was a daily...

I think I have an NOS complete that was not sold at the Nat's last week. will check bins tomorrow

the plug holds the grille. Looks like your bumper has been TWEAKED. there is usually 1" of space between the the grille for the bezel to slide out. a side view photo of the bumper will show the placement of the correct location of the bumper in relation to the fender and there by match the...

I called petronix tech and they said to bypass the ballast resistor as it is not needed

1970 plate says Chrysler solid state, the front plate must be L shapes and there is an S bracket on the back I think I have a restored one from Instrument Specialties a that I will not need now or a complete used one can send photos to your email address from my phone [email protected] or computer...

working on a 1972 Dart swinger 340 special here in CT

the switch for the seat unplugs under the seat to replace the switch if it was bad. this would stop the buzzing the harness is the same for either switch - just uses different terminals when attached. 72 2 speed wiper motors were different from early 2 speeds but none ever came with delayed...

year one is only supplier as the person making them will not sell to end user. get a discount code for YO before buying

one is ignition and one is turn signal - both come down column

top one is washer hoses if variable/3 speed it is a plug

the 70 thumbwheel has a pentastar and chrysler solid state - no Dart/plymouth

the 70 swinger 340 had a rallye dash and thumbwheel radio. the standard swinger had knob style. all 1971 Darts went to knob style. Is there a cigarette lighter hole in that repo bezel? I have correct radios and bezels for the 70 swinger 340 cars. just tell me what condition you need. have...

there is a metal holder, for lack of a better word, that clips into the ash tray wall and the flasher just pushed into this basket.

there is a long black wire with a hole clip on each end and one end goes from wiper motor stud to blower motor stud

the brass end is the ground and goes on to the screw to hold down the washer tank. it goes on the screw closest to the firewall. the brown power wire goes to the bulkhead and mates to the brown wire coming from the wiper switch.

both are ground wires that someone changed the ends on. Since your grille is plastic, that is the ground wire for the turn signal light. Normally there is a push on terminak on the socket. I think yours is rotted off or broken, cannot tell by the photo. Other wire on battery is a ground to...

I have a 2947801 switch, new, no box. I purchased for a friend and he never picked up or paid me for it. I will never use it as I have 70 swinger 340's. How is $75 plus shipping?? [email protected] Joel