Search results for query: *

I also drilled thru the connector and spot welded a piece of steel tubing in at an angle for the cable to pass.

Go to 521 Restorations website. He has the base kit with antenna lead for about 30. I just got one from him.

You can buy interior and exterior screw kits. Interior usually has dash, door panel, door arm rests, some trim and so on. Exterior usually has wheel opening trim screws and I can't remember right now what else at the moment. Or you post what you are looking for and some of us with buckets of...

Don't cut the wheel well's out.

If you can save the radiator support and the left side trunk gutter do it. That is where the sequence numbers are stamped.

The only numbers on the body of a 68 dart are on the radiator support usually under the antifreeze label on the driver's side plus on the trunk gutter under the seal on the drivers side about eight inches up.

I have it and use it a lot. My welder is a Lincoln 175. Usually I set it on the B scale and a little under 3 on the wire feed.

I just mine back from Rick's Radio Conversions. He is a member here.

WED 15 25 percent off

You can buy a new set of Scat SIR rods for about the same money as resizing and putting new bolts in your 40 year old stock rods.

I just got done doing full pans on both sides of my 68 dart. Used my plasma cutter on the driver's side then switched over to a grinder with a cut off wheel for the other side. Ended up redoing both lines anyway since I also installed US Car Tool Frame connectors. Just be careful.

I would think they would worth a pretty penny to the numbers correct guys.

Mine are still in the box.

I got a "Mopar Avenue" street sign.

Contact Hemidenny for that aluminum K frame

I don't know if it's necessary but why take the chance.

Shoot me a pm with your address. You won't mind a 2 or 3 from Kansas would you??

Geof, Are we having fun yet. Jeff

Just for the sure grip?? $175 to $200 is fair.

Keep it covered. Throw in some dryer softener sheets and hook your battery up to a Battery Tender.

Added 1

I have a 69 dart drag race car with a 417 stroked small block. 10.30 at 128.69mph

I have a set of 360-1's on my race car. Great heads. If I need parts I order from Indy.

$20 on the 66 hemi under glass model.

The 67 I had used knobs, but I think they might have thumb wheels also depending on the production date.

I tried baking the headers for my race car. It was a waste of time.

I was going to say I've purchased several of them off of e bay. I can't imagine they won't ship it to you at a reasonable price.

Go to your local hardware store or NAPA. They should have them

A member here has one for sale. You might see if what he has will work.

Yes, I have the same manifold on my 340 along with a Quick Fuel carb and had to run a drop base air cleaner.