Search results for query: *

We welded plates to the floor and welded bolts pointing up so you can use nuts to bolt it down

We use that dynamic converters from Frank Lupo as are using one in our 408 stroker runs 11.50s it's there 9.5 converter we drive it on the street and drag race it very street friendly and it's a 4200 stall Woke the car right up. Cut our best 60 foots with it so far 1.58 in a 3200 pound Volare

yes we have a body 8 3/4 also spare b body housing. we would never cut the a body housing we were wondering if narrowing would allow for more tire

Well after two years of building a pair or Volare's for my son and I we have rolled the Dart back in the shop and are going to spend the off season finishing it. Car tool conecters are installed and work on relocation and mini tub has began. so my son says to me since we are gaining three inchs...

if it's whining I would think you have problems that lube change won't help

No problems here easy as pie. Make adjustments small start with wide open so trans lever is pulled all the way and then come back a little at a time.

I have the Lokar throttle and kick down with 0 issues Not that pricey, there are others out there but remember you get what you pay for....Larry

x2 on Lokar we use it and it works great and not to pricey

Thanks for responding Guys I checked out both links and they don't give very much info or pics or prices , do you know if you have to buy them direct or if there is a supplier who sells them, do you know a ballpark price?

bump

We are lookng installing a trans brake in a 727 and are wondering if anyone could tell us which one is best and where to buy one.

Find yourself a cabide cutter for your domore it will ream those slots in no time and will last forever almost if you don't over heat it. Roll it in canning wax every few minutes that will keep the teeth from clogging up, once they clog up they are hard to clean. You will find alot of uses for...

Had the tranny built by a local retired tranny guy, he has done quite a few for me over the years and never had a problem, he will fix but I was hoping I wouldn't hve to pull it out again

I beleive it is a TF-2. Is it hard to free up the govenor?

Already Tried that same thing... thanx Kim

Need help with no shift on my fresh 727!!! Trans has fresh rebuild, Trans Go kit set for street strip,3500 stall,B&M shifter and Lokar kickdown cable, deep MP pan. I have repetedly checked shifter set up and kick down cable adjustment. fluid level good.have reverse park neutral and drive 1&2...

Good day all We are installing the new trans in my sons Road Runner Clone and we need to know the torque spec's for the flex plate at the crank and at the torqueconvertor. B&M plate and ARP bolts on both 7/16 bolt on the torq. Thanks

I have have a 727 clutchflite and I don,t know much about it, anyone with some knowledge please fell free to chime in as I myself and Wylde1 would like to know more about them