Search results for query: *

I found tailgate hardware too. I am looking for a 4bbl intake for the old 318 "POLY" engine with or without carb. I understand they were on the commando engines.

I got one!!

http://www.forabodiesonly.com/mopar/showthread.php?t=31574&highlight=360+flywheel

I'm in the same boat for 360 flywheel ext. balanced. If it is the same, you can have your 318-340 flywheel machined. There is a print on my request for one under parts wanted. I'll try to send it to you if I can. Thanks

Thanks to P. Blumberg in Charlotte NC, The schematic arrived today. Thanks, I'll git-r-dun at my machine shop. Thanks Again, Alan

I am looking for a radiator for a 1965 Dodge D100 Sweptline with old 318 polyspherical engine. Inverted radiator mounting and lower hose on drivers side. I am also looking for some tailgate hardware if someone knows where a donor may be. Thanks

Also saw one on Ebay ending soon but sounds like his may be better.

Thanks for the info guys. I have 2 318 flywheels, so I can get one of them done. I will always have that little doubt that it was done correctly but I will find someone locally that I can trust to do it right. Thanks Again, Alan

I am looking for a performance cam and 4bbl intake for my 318 poly 1965 D100. I understand that they were available on the "commando" 318 poly. Anyone know where these are? Thanks, Alan

I have built a 360 to go in my 1971 Duster and will soon be ready to install but I think that I made a mistake. A couple years ago I found a 360 TRUCK flywheel and didn't stop to think, just knew it was a 360 flywheel. Well, I just got the 4speed, bellhousing and a 318/340 10 1/2" clutch and...

I wound up with 2 spindle assemblies but they are both right side...lol. I will be selling parts if you need anything right spindles and gravel shields and pair of calipers. Just let me know. Thanks, Alan

My $350 hub and spare parts...lol

sent you an email. Thanks, Alan

Yup, you knock the lug studs out of the hub/rotor assembly and separate the two pieces to replace the rotor and I draw the studs back in carefully with lug nut and spacer to press the new assembly back together. Your local parts house will have listings for rotors and all bearings and seals they...

Bought a whole lot of K/H brake stuff and will have my parts. Thanks all.

I will be having a complete setup for you shortly, I need time to get it all together. These will keep the small bolt pattern, if you use 73 and up, it will also change to big BP and you would also need the upper control arms with larger upper ball joint to fit top connection to spindle. I will...

SUPER DUPER!!!! Please let me know either way!! I hope that you do. Its been hard to find. I also need one caliper attaching bolt with just the SBP hub. I am in Oklahoma, please reply here or call me at 918-304-7100 Thanks, Alan

I found a guy that has several K/H brake parts including what I need and enough leftover to make another whole setup, but he has never responded since sending me pics. I have tried several ways to contact him without a reply. I guess he changed his mind. I wish he'd call or write me back. Maybe...

I am still in need of the hub and caliper attaching bolt. Someone out there must have one.

Someone Must have a hub out there somewhere. One from the good side of a wreck perhaps?

I have an mostly original, running, driving, numbers matching, Hang 10. Mostly body work to repair some rust spots. front seats need redone but I think that the center cloth strips are salvageable. What kind of money are we talking? I just got it and need to replace center 8 3/4 rear pumpkin...

I am looking for one too, near northeast Oklahoma, 918-398-9412 Alan

I will buy the complete assembly if need be, new or used. Someone must have one out there but no response yet. Thanks

I have 4 stock steel wheels on the car now. Rubber really isn't any good, so I can have the tires removed for about $5 each and save on shipping. I want to keep at least one for a spare tire in trunk. These aren't very deep dish just the stockers. I can send pics if interested. I guess $10 each...

If not the ones in Fresno area. I have whole set up still on 71 Duster. Thanks, Alan

I have a nearly complete 4-piston Kelsey-Hayes caliper setup for my 71 Duster but need one caliper attaching bolt and one hub. I already have new rotors to install on them. I may also have spare calipers too. Thanks, Alan

I have some American Racing centerlines that will be going on my Duster. I would have to check what is on the car now. I'd be happy to do that tomorrow and can send you pics of what I have. Thanks, Alan