Search results for query: *

Very true, or buy pre mixed 50/50 and forget about it.

Because they will eat everything in the system for some reason. Conventional green, and I believe you can also buy zinc sacrificial anodes to put in the system as well to help with dissimilar metal corrosion. :D

The funny looking 5 blade setup was used on M body up thru 1989. Nothing special. Very common fan.

Heres a non AC firewall. The stamping is the same. Holes are different

The actual sheetmetal stamping is the same AC to non AC the difference is where the holes are all pressed in it. I will get you pix of my non AC firewall tomorrow.

Or this if you dont want a cable to open and close it. Nicer looking than a plumbing ball valve. Open it up for winter driving.

70s dodge pickups used a cable operated valve. Get one of those, mount it inline and install a cable. Heres 2 nice retrofits for that. Cable and electric

Ball valve from lowes and couple barbed fittings.

I did something similar to Kendog 170. Did mine about 8-9 years ago. Made a mould, and covered it with plastic film. Stapled an old cotton T shirt over it. Applied a 4 coats of fiberglass resin. Scuffing between coats. When dry, I popped it out of the mould, and flipped it over. Screwed it down...

Really good looking fabrication work

That's super awesome. Did you custom make these?

Use search function. Somebody asked that same question here about a week or 2 ago.

The dash controller , and firewall changed in 1973 on the AC cars. Not sure if it remained the same on non A/C cars after 72. Classic air kit adds a micro switch to the hot/cold slider on non A/C controls. When you move it to full cold, it kicks the compressor on. Kit is designed for a direct...

Awesome. Was that one pack enough to do a pair of vents?

Not wanting to get political, but Honestly the pushback will be great from these EOs and killing the oil industry. If I have a guess, they will cap the pipes already in the ground, and wait till midterms, or when hes out of office. The oil wont stop coming, it's just going to come very...

Got the idea from guys that make custom speaker enclosures in car trunks using cotton fabric and fiberglass.

More pix. Homemade steel brackets bonded with JB weld, and also riveted on with MS20426AD solid rivets.

383scampman , dadsbee , check out making a fiberglass shroud using a homemade mould and an old pocket tee shirt stretched over it with a mould release. Soak the stretched cotton with multiple layers of resin. When dry pop it from the mould, scuff and fiberglass it on the inside with fiberglass...

Looks great !!

Original was bent to crap. I made the same height as the OEM support. The AMD 16 gage exact repop support was $189.95. My bullet proof copy made of 14 gage 2x3 rectangle tube cost me $8, and a lot of fab work to make. Pix of what I removed and replaced. Radiator support to K frame center brace...

I have not attempted a stock shroud. I finally settled on how to fix the bent to hell lower radiator support. I am made of more time, than money, plus fabrication skillz so I replaced the lower radiator support with new home fabricated one out of 2x3 14 gage box steel, and repaired the top cap...

Both cudas I have were factory without A/C. I plan on putting in the classic auto air solution. 4 rectangle vents mount under the dash, the unit is a straight bolt in to a non A/C firewall and uses the original non A/C slider controls. Adds a micro switch to the cool side of the one slider to...

Do the defroster hoses for 67-76 A/C cars fit lengthwise on the NON A/C cars? Are they longer? Shorter? Thanks in advance. Matt

Not enough to remove it.

Summit sells a version made by Derale for about $44. Riveted steel blades heavy duty. I have seen it there in 17", 18", and 19" take your pick. I have 2 of these in 18" along with Hayden clutches. They fit fine on the clutches.

Here ya go lol

He stated engine was fine after a T stat change last year, and did not start getting real hot until "right after" he replaced the water pump. I am betting they sold him an A/C type 6 bladed pump. Y'all are shooting down the wrong snake hole. If it was a plugged radiator issue it would have...

Leave radiator location as is, and put a monster sized electric pusher fan on the front ??

Theres 2 types of impellers. 6 blade and 8 blade. The 8 blade impellers are for non A/C cars because of a larger diameter water pump pulley that turns the pump slower. The 2 more blades is to increase the coolent volume because of the larger and slower turning pulley.. The 6 blade impeller...

Subscribed