Search results for query: *

A 15 will fit with a 195 tire, but good luck finding them!! 14's are still kinda out therA

na....just saying. His set up is working. There's lot of stuff that "could happen" But what really will??? Hell I've seen some major hack jobs but I don't think that lifting the rear a little is bad at all. Look at every wanna-be hot rod from the 80's. That's kinda what they make...

Don't listen to that ****....It looks good, fits and it works.

Take the hub off....hammer them out....get right hand studs!!

You can change your axles or have them welded and re-drilled. Moser does it for cheap. They will also switch you over to the studs you need. You can also send them your front hubs to have the same thing done.

Keep those wheels on the track, they are too light and only for drag racing. You will waste a lot of money if you run them on the street, they bend pretty easy.

I think you have a later model tire there, not sure if you could even give it away, but I can't say for sure.

Also with the lugs, you will need the offset washers for the Cragars. most the Cragars I've ever seen go from 4.25 to 4.75 so fitting them later shouldn't be to much problem

If ya don't mind changing it and it's gonna just be a driver you can send your axles and hubs to Moser. I think for around 250.00-275.00 they changed mine to 4.5. Axles get green bearings and new 3 inch studs, hubs get just studs. For sure the way to go I think. Than run any wheel you want.

hubcaps on a Cuda???? might as well put on some whitewalls to. I don't care for them myself on the Cuda's but I have some pics I will try to shrink down for ya later this evening.

those polished ones are pretty sweet!! Hope you have a Dakot to put them on, being 6-lug that's all they will fit

hell, I have a set of those on my car-hauler, came off a 69 roadrunner

I don't know who makes them, don't think it matters though if you like them. they are a real good quailty wheel, they are a little heavier than a Weld, but they are also a better street wheel than a Weld. Welds are light and meant for the track, these are a good all round wheel

I don't know about the Summit brand, but these are the Jegs brand and they are pretty sweet, I think they were cheaper thand the Summit wheels. They are a one peice wheel, super nice wheel for the money

I don't know man, that's a lot of tire. I have run a 215/60/15 on a 72 duster but it kinda rubbed the sway bar. that may be to much for the front. I have a 205/60/15 on my 69'cuda now and it rubbes a little

wouldn't it be a lot easier to just change to 1/2x20 lug's and nut. There a lot stronger and easier to come across, just about any parts store has them

i have a 275/60 15 on the back of my 69 cuda, no rub, stock spring/location. 15x8 whell on back 4.5 in b.s.

takes the front hubs off and slide out the axles, send them to Moser. They will weld and redrill the back axles to the 4.5 bolt pattern and redrill the hubs to. I sent them my stuff and only had like 300 bucks in everything, new 3 inch studs new green bearings shipping and all. That's the...