Search results for query: *

  1. moparstud440

    gauge circuit board

    Update I got everything working! Ended up being the turn signal switch. It needed ALOT of tweaking to get it to work. The pins were too long, to close to the turn signal switch part and not making contact and than they weren't bent out enough to touch the contacts. So after about a dz times...
  2. moparstud440

    gauge circuit board

    Thanks, The factory bulbs should be sufficient as I really don't plan on driving the car at night, just for daytime trips or after work trips to the ice cream shop, but just incase I do end up in the dark atleast I know I'll be able to see the gauges.
  3. moparstud440

    gauge circuit board

    After a quick check I have power on the orange wire going to the dash. I ended up pulling the dash from the car. I made a fixture to test the bulbs and discovered that a few of them were blown. Than I rigged up a way to test the bulbs in the dash before reinstalling the dash and most of them...
  4. moparstud440

    gauge circuit board

    So I fixed the 2 pins tonight and go my left turn signal indicator light working. My dash lights still don't work. I checked to make sure the pins had connection before putting the board back in. Guess I'll have to trace the other dash light wires.
  5. moparstud440

    gauge circuit board

    Thanks for the replies guys. I work in the electronic field and actually run a surface mount machine as a living, so soldering is something I can handle. I didn't notice the pins still sticking in the connector and since the dash was already out of the car when I bought it I'm thinking the old...
  6. moparstud440

    gauge circuit board

    My car does not have these.
  7. moparstud440

    gauge circuit board

    I've been troubleshooting my car (69 barracuda) since I put it back together after paint. The dash was out of the car when I purchased it so I've never had everything working before I tore it down. I have no brake lights or turn signal lights, but I believe that has to do with a faulty turn...
  8. moparstud440

    Help

    Okay so the reason the front lights were blinking is I had the 4 way on. After a little more testing, my turn signals do not work, no brake lights, but my parking lights work (headlights + tail light). I tested the brake light switch it is functioning as it should. Has power going to the...
  9. moparstud440

    Help

    Got my car (69 cuda) painted a few weeks ago, working on putting the grille, trim etc back on the car. I had the car running before paint with the headlights in it. The green turn signal indicator light would flash every once in a while, but I just assumed it was because not everything was...
Back
Top