Search results for query: *

I have an old Mall saw ( my grandfathers, he was a construction company), and I also have a 194? Tecumseh Power Products chain saw i found at a garage sale.

Whoever my secret Santa is, if you could come up with a way for 09SRT6 to print out a 62 valiant 2 door (stock looking) that would thrill me! (Hint hint)

If the caster mounting plates are out of level even slightly the casters will all steer in different directions.

When I was a teen (back in the dark ages when radials first came out) I used to go to the local tire shop and dig through there junk tire pile, find tires the right size that still had tread in the middle, and mount them up on my rims. Never had any sort of changer machine, just two tire irons...

x2

Stihl with 24" bar, nothing but good to say about it.

http://www.surpluscenter.com/Electric-Motors/AC-Motors/

Try looking here for parts like casters. (http://www.surpluscenter.com/home.asp)

Sharp! I may steal the idea in a lighter version for myself.

x3

Use a section of hydraulic hose between the tank and the hard lines. It will handle the pressure no problem and isolates the piping from vibration.

You could try pallet racking. 2000# per shelf. use 2 by x for bench top. they can really take a beating. I don't have room for the racking at full width so I cut the stands down to 24" spacing and have a bench 24" x 8' and continued with 8' of shelving at one end that I can set each shelf at...

How long do you have to bake it to get it tender?

I built some from square tubing and casters. They are universal and could be used with engine/trans together.

Like the double duplex outlets in the last pic, you can never have too many outlets!

I wish my garage looked as good as your first picture. There is no room for a car or a rotisserie.

If I were you I'd at least build a box around it to reduce damage in case of rupture.

Another place for parts is www.surpluscenter.com. Good prices, good service, good selection. If you get a catalog it's easy to compare parts to select them, but some things are not in it.

THAT IS ONE CLASS ACT!!! Almost art work in there. Looks loved.

If you are putting the insulation against the underside of the rafters you will need a soffit vent for each rafter cavity because the air would not be able to circulate in the rafter spaces with out them.

Purple power, Super clean or any other cleaner that lathers will not work good in a dishwasher. Once it foams up there is no impact from the water spray, also the pump will hardly move foam, so no squirt from nozzles. I fix appliances for a living so I know from experience they don't like foam...

Set your jackstands on brake rotors to keep them from sinking. They will give lots of surface area to hold the load and are not so big that you have trouble working between them, I do not recommend pavers or other thin masonry because they are more likely to crack and could dump your car on you...

If you can find some pallet racking units they make some very heavy duty shelving, and you can set up part of it as workbench. I even narrowed a section for workbench so I can fit it in my 1 car garage with a car.