Search results for query: *

if I were to go that route what would my adjustments be ?

wondered why my car wasn't running right, it turned out one of my pushrods went thru one of my rockers. what kind of rockers pushrods would you recommend ? I have a 360 10:1 compression with a purple shaft 474 lift cam. thanks

ok this is where im at...first I installed a old fuel pressure gauge and was able to set the fuel pressure to 5psi, then I pulled the plugs here are the results...1( 90 ps1 ) 2 (90 psi) 3 ( 100 psi) 4 (88psi) 5 (90 psi) 6 ( 92psi ) 7 (90 psi ) 8 ( 94psi) these were taken when the...

I'll test everything tommrow

the engine was built years ago, and stored with lotsa marvel mystery oil. put it in the car last year as I was doing work on it, I put break in oil and ran it, it was getting low vacumn 10" I noticed a anti freeze leak coming out the front corner of the left cylinder ( front). the person who...

so what do I check or do ?

before I changed the oil, I would crank it and I would get like a fine mist cloud out of the carb, and gas smell in the garage

I have a carter street/ strip electric fuel pump and a summit fuel pressure regulator 4 1/2 to 9 psi

I just changer the oil, haven't cranked the engine yet ?

a carter fuel pump for a carb engine. my problem is a bought a fuel regulator I turned it all the way down and according to my fuel gauge I'm still at 20-25 psi I don't know what I else I can do , everything is new ( even the fuel lines ) ?

it is

I know, but you have to tackle one thing at a time

not really, it wants to though

I think I found the problem....when I installed the electric fuel pump, my gauge was reading 5psi...just checked it before it was reading 25 psi....time for me to buy a pressure regularator

im putting out 6psi, do I need to get a regulator to cut it back ?

first im getting spark when I turn the key, just a regular cranking noise...but im getting a lot of fuel mist being shot up...plus if I put my foot down and hold on the gas pedal down it acts like it might want to start, but does'nt

I have a 73 scamp with a 360 super thermoquad ( rebuilt by scot smith) a carter electric fuel pump. I have a ready to run hei distributer and coil, I lined up the timing to tdc, made sure my wires are right im getting gas and spark I cant get this thing to run so I can time it...

do you remember what size ?

you just made my life a whole lot easier.....thanks

I bought a lokar throttle cable kit DP-1000HT for my 73 scamp the only problem the cable don't fit...any ideas ?

I took 383scampmans advice and bought the Lokar setup......ill see how it works

the pic shows how much longer the cable is, because I can drape it over w here the cable should mount

this is my other problem, linkage seems longer then it should be.

thanks

I have the same bracket and it doesn't work with the edelbrock manifold

thanks for the info, do you remember the part # ?

the cable is too long and the bracket doesn't fit the manifold

I have a 73 scamp with a 360 4- speed I installed a edlebrock performer intake manifold and topped it with a thermoquad I cant find any throttle brackets that will work,my old 2bbl bracket wont work. I bought a 340 4bbl bracket that didn't work..i tried to modify it so it would work, but it...

don't have to worry about kickdown/throttle pressure.....I got a four speed manual

I installed it this morning