Search results for query: *

That's what she said.

So long term, the JB weld and brass tubing holds up?

So the head bolt hump can been ground pretty much straight? Or is that just starting to go through to the other side?

I just measured one of the chambers, and I had .13 between the gasket and the wall, so less .05, still leaves .08 that could come out of there.

That was using a Fel-Pro 8553PT gasket. Which is like 4.17. But even if it is bigger than the bore, wouldn't the benefits of the extra CFM still warrant unshrounding it? The stock bore is 4.04, mine is +.030, so I've got 4.07, meaning .1 bigger, .05 on either side of the circle. .05 isn't...

I just lined up my head gaskets, looks like there is quite a bit of material that a guy could take out to unshroud the valves right?

And would that mess with the valve height or keep everything same same?

Anyone measure what these come with out of the box?

So, if you wanted to have a better valve job done on these heads, would the machine shop have to put in all new valve seats, or could you cut a 3 or 5 angle valve job using the existing seats and then also re-use the existing valves?

At only $42.95 each, better buy a gross of them.

Are there any considerations with heat range of the spark plug that should be taken into account from cast iron to aluminum head?

Interesting. Are there longer spark plugs that should be ran?

Mine just got here today, 06/01/2015 stamped on the pair I got.

The one thing you need to know about patients is that you'll need a lot of patience. Sick people are really needy.

I called last week, and the guy on the phone said that they had like 3,000 orders over the weekend, so they were going to be a week catching up. I still haven't gotten a tracking number either, but I didn't pull the trigger until the 2nd.

Voted for Bill Clinton the 1st time around. It hurts saying that.

^^^^^^^^^^^^^^^^^^^^ This!!!!!!!! Fuel would have to be coming out of the boosters for the power valve to have any effect.

I'm still wondering how the power valve can affect the idle?