Search results for query: *

Frank, these are the 2" rings I put on the 6" rims. A 2.5" would be better, but these work for me and the price was right.

I ordered 2" rings. I know they won't be perfect, but it will be better than nothing. Naturally, the 3" ones I had fit the rear just fine.

I ended up buying Wheel Vintiques Mopar Rallye rims. 15x7 with 4.25 backspacing with 255/60-15 in the back and 15x6 with 3.75 backspacing with 195/65-15 for the front. Plenty of clearance from tire to leaf spring, however, I did have to trim the inner fender lip about 1/4". There was room, but I...

Yes, my mistake. It’s 4.25”. That being said, i ordered the 15x7 Rallye Wheel with the same back spacing. My 255/60’s will be much happier on that sized rim.

Thank you!! If I went with a 245 or 235, I would have more clearance. Unfortunately, I just bought another set of 255's for the rear. Damn it! Lol!

Ok, I'm bad with math! I currently have stock Mopar Rallye rims on my 72 Dart. Large bolt pattern, 15 x 6.5 with 4.5" backspacing and 255/60-15 tires on the rear. They just fit. Clearance from the leaf springs is 1/2", as is the inner fender lip, also. I'd like to get Crager SS's 15 x 7 with a...

What's your axle ratio??

It's called cleaning vinegar and it's made by HDX. It has a higher content of acetic acid than conventional consumable vinegar. It's in the cleaning supplies section and comes in a half gallon bottle. No, I don't dilute it.

I buy commercial grade cleaning vinegar at Home Dumpy. I soak oxidized carburetors in it. It contains acetic acid. You can also use Coca Cola for iron based metals. I soaked my Rusted Olympic weights in it for a few days. The citric acid works on the rust very well. Rinsed and painted. Done deal!

I replied to your PM. The only mod I did was to trim the inner fender lip. 15x8" rim with a 4.5" back spacing. 5 on 4.5 large bolt pattern.

Thank you! She's my baby!!

Sure, I'll pile on! 225/60-15 in front, 255/60-15 out back.

Not sure about that back spacing. Would look good on a Rustang. I personally don't care for the style, but to each his own.

What's the depth measurement, Frank? 2", 2.5"?

Sooooooo, where did you get them? That's what I'm trying to figure out!

I plan on getting some 6" rallye wheels for the front thru Summit. I currently have 15 x 7's on the front and want to go skinnier on the tire width.

15"

Who makes them? I can find them for 7" and up width, but not any smaller.

Does he have 15" rings??

I'm preparing to repaint the rims on my '72 Dart and purchased a few cans of the Mopar Argent Silver from my Dodge dealer for the rims, however, the acorn center caps take a Light Textured Argent Silver. I was told Krylon Textured Shimmer is pretty close. Any thoughts??