Search results for query: *

Set it up how u like it an have fun! Good looking car.

Mounted on a 12 rim with 30lbs of air it's 13 3/4 section. I did call mt before I mounted them, they said a good rule of thumb is a 1/4 added to section width per inch of rim. The tires are advertised at 13.10 on a ten inch rim an he said to add a 1/4 to that for every inch wider I go with rim...

They fit. About 5/8 space front an back. Rubs a little in a tight turn. when it rubs it's on the inside wheel well. I think I can massage it well enough to get it to stop. But all an all very happy. I played it conservative when I originally ordered tires an had all this space in the wheel well...

I measured a mt sportsman pro with a sec with of 13.1 on a 12 inch rim with the tire on the floor an a strait edge it measured 13 an about an 1/8. I guess that's why I thought I could get away with 12 inch rims. The tires are still in transit maybe Monday I should get them, I'm going to check it...

Wow they showed up today, looks like measurements are good, holy cow I know there only 12 inch rims but these things look huge. I had a friend loan me a 13 inch tire to slip up in the fender well where I can get a good look at where things are going to sit. I've looked at the tape measure an 13...

Thought he was talking to Ronw about 10 inch rims. I thought advertized was up to 12 inch rims. I did'nt know 10 inch rims where recommended. Thanks.

Ordered them today. 15x12 with a 7 1/2 back space I transfered measurements to the floor with level an framing square. It looks like it should leave about a 1/2 inch to 5/8 on each side of the tire. Summit said they have no problem taking them back if they don't work as long as I don't mount...

So I'm finally ready to get a different width of tire an rim. I am running 275-60-15 by Goodrich on 15x8 with 4.5 back space. i've done some measuring today an have a total of 14 1/2 inches from the inside well to the inside fender lip. And from the tire mounting surface on the drum I have 6 1/4...

I was told I needed at least 10 rims. I also intend to install 325-50-15 on my 68 dart.I have 15x8 draglites with 275-60-15 and was told 325-50-15 would bulge to much on the sides and there would be less of a footprint to the ground. I believe they said there was a danger of the bead letting...

I thought 9 inch rim was narrowest that a 325 50 15 can be mounted on. Do u have a picture? I am wondering because I also have 15x8 back rims and am interested in mt 325 50 15