Search results for query: *

These are the ones I used with very little banging on them. The only place I had to bang on mine was at the power steering shaft. You will have to drop your steering linkage to get the headers in but not a big problem.

Go to Magnumswaps.com and read up on what they've done it's full awesome tech and swap info and a lot of parts you're gonna need. I used the 904 also so you're gonna need the magnum flex plate and a neutral torque converter for it to work together. If you read the website it'll tell you that you...

The answer to your questions is yes. I did this swap also in my Scamp your also gonna need LA 340/360 motor mount brackets. Listen to your builder and go with the EQ heads don't waste the money on Edelbrock's you can use that extra money somewhere else on the car like a good electric fuel pump...

Yes Rock Auto does carry it. I bought mine from them at a reasonable price too. And absolutely correct about the bolt hole!

magnumswaps.com is a great source for parts and info on this swap.

Yes. I did this conversion in my Scamp. Be sure you get it for the 5.9 and NOT the 5.2 they're different!

Get a flywheel for the 5.9 from rock auto and be sure your torque converter is a neutral converter so basically any for a stock 318 will work.

Schumacher Creative Services Look for the exact application that your going. AKA: spool mount

I agree, but you and I both know that makes to much sense! Lol

NOPE! They're different. The 5.9 will use the 340/360 mounts the 5.2 uses the same as the 318. I know because I did this conversion and went through all the head ache of finding out! Do yourself a favor and order the correct mounts! Make sure it's for A body and not E body again different.

magnumswap.com it's the bible on the subject! And I wouldn't give more then $500 for it cheaper if you can get it.

I've done this swap in my Scamp and you'll love it. If you haven't gotten your motor mount yet save yourself the headache and get the Schumacher motor mounts $144 plus shipping part #A67LA a direct fit. Good luck with your build it's looking good!

I just did this swap. I got a dual plan air gap intake off ebay $150.00 on a tight budget you can't beat them. There's going to be some modifications needed to run the cheaper headers! You must! I repeat, must grind off the ram truck engine mounting points that are on the upper middle of the...