Search results for query: *

  1. coloradohill

    [SOLD] 8 3/4 shock mounts

    One set of shock mounts in good condition. Threads are in good shape. Asking 110.00 shipped anywhere in the lower 48 from 80534.
  3. coloradohill

    [SOLD] Manual steering box

    I have a good used manual steering box from my 1967 Barracuda. Worked fine, I just replaced with a quick ratio box 5-6 years ago when I rebuilt the suspension and steering. Asking 40.00 plus actual shipping from 80534.
  4. coloradohill

    [SOLD] A Body 8 3/4 Rear Brakes (updated)

    I have a nice 8 3/4 A Body brake setup off a 1969 A Body 10 x 1 3/4 Drums, backing plates, and most of the hardware is included. This was taken off a running car that went to bbp. I don't have a drum mic. but drums look like they are 10" and could be cleaned up and run or a light cut is all...
  5. coloradohill

    [SOLD] Adjustable pinion snubber

    I have a nice adjustable pinion snubber for sale. Asking 40.00 plus actual shipping from 80534.
  6. coloradohill

    [SOLD] 8 3/4 shock mounts

    I have two sets of 8 3/4 shock mounts (plates). The threads are in good shape. One set is painted black and the other set is bare. Both are in great shape with no pitting. Asking 100.00 / set plus actual shipping from 80534
  8. coloradohill

    [SOLD] A Body SBP Axles

    Two oem A Body axles in good shape. They had some surface rust that cleaned up with a wire brush and some minor pitting. Splines and studs are in good shape. L/H studs still in one. Each axle weighs approximately 15 pounds. Shipping for both will be about 40.00 depending on zip code. Asking...
  9. coloradohill

    [SOLD] A Body 8 3/4

    I have a very nice A Body 8 3/4 housing with sbp axles. Backing plates included and I will update photos to show them. Shock plates available if needed for extra $. I have a couple pairs to choose from. Asking $800 plus shipping.( includes axles and backing plates). I can ship through Fastenal...
  10. coloradohill

    [FOR SALE] Lower ball joint

    I have a lower ball joint new in box that I don’t need. It’s a K781 from parts master I purchased over 7 years ago. Not a Moog part ( just for reference) https://www.moog-suspension-parts.com/moog-k781 Located in Northern Colorado Asking 40 plus actual shipping
  11. coloradohill

    [FOR SALE] Passenger side lower ball joint

    I have a new Parts Master K781 ball joint I wont be using. These fit a lot of vehicles , It is the large bolt pattern lower joint moog-k781 | Front Lower Ball Joint | Dodge Challenger | MOOG-K781 ( it is a Parts Master brand, not Moog ) Asking 25.00 plus shipping and paypal fees (if any)
Back
Top Bottom