Search results for query: *

Hello, I’m looking for a complete set of main caps for a 340 engine block. Please message me if you have a set. Thank you in advance for your help.

Looking for an idle stop solenoid (and bracket, if possible) for a 1970 Carter carb. Please PM me if you have one available.

Looking for a pair of 340 Motor Mount Brackets for a 1970 A-Body. Please PM me if you have a pair.

Looking for an original stock 340 distributor for a 1970 340 Auto. I believe the part tag number should be 3438325?

Hi- I'm looking for an factory original 7290 yoke that has the large joint/coarse spline. Please message me, if you have one available. Thank you in advance!

Hi- I'm looking for a complete 727 trans dipstick and tube assembly for a late 60s/early 70s A-Body.

Hi- I'm looking for an original idle stop solenoid for a 70 4-barrel Carter AVS carb.

Please PM me if you have spare tire hold down hardware available for an A-Body. I'm working on a 70 Dart.

Hi- I'm looking for a clean AC vent for a 70 Dart. Here is a pic for reference.

Hi- I'm looking for a small block Mopar engine oil dipstick. The overall length of the dipstick is 16.75" and the handle length: 4.75".

Hi- I'm looking for the bolt that attaches on bottom of the master cylinder as depicted below. Please message me if you have one available.

Hi - I'm looking for an engine oil dipstick for a 1970 SB engine assembly. Here are some rough specs: Overall length: 16 3/4", Handle length: 4.75"

A friend is looking for a pair of 340 X-Heads for his 70 A-Body. Open to complete or bare heads.

I'm looking for the Philips head fastener with a spiral point that is used for the securing headlamp assemblies on a 1970 Dart. Attached is a photo for reference.

Looking for a rear shock mounting plate for an 8.75 A-Body axle. I only need the LHS, if someone has only one? If not, I would also be interested in the pair.

I'm looking for a single point distributor lead for a 1970 A-Body with a 340 (auto). Attached are a couple of photos. The grommet attached to the lead is designed for a pass through hole as opposed to snap down style found on other engines and model years.

I'm looking for the park brake cable clamp that attaches to the dash frame. Below is a pick of the clamp.

I'm looking for a pair of original small block 727 transmission cooler lines.

Hi - I'm looking for a few fasteners Phillips Fillister 8-32 (qty. 2) 5/16-18 Pierce Nut (qty. 1)

Hi - I'm looking for a nice (dent free) rear bumper for a 1970 Dodge Dart (brackets - may only need LH, but will buy both). I will send it out for re-chrome.

Hi - I'm looking for the mounting brackets and mounting hardware necessary to secure the brake booster assembly to the engine compartment sheet metal (reference attached photo). I have the booster assembly, but missing brackets/mounting hardware.

Hi- I'm looking for a complete set of RH/LH window channels and hardware for a 70 Duster. Please PM, if you have the components.

I'm looking for some seatbelt covers for a my 70 A-Body in green. Attached are the covers that I'm looking for.

Hi - I'm looking for some A-Body disc brake bolts that are used to secure the lower ball joint to the spindle (1/2" fine thread) and caliper to spindle (7/16" fine thread). Both types require 4/vehicle.

Hi - I'm looking for an original single groove crankshaft pulley for a 1970 small block (340) engine assembly with a forged crank. The part number is 1821449.

I'm looking for an original SB 727 trans dust shield with the inspection/access cover.

I'm looking for stock/original seatbelts in green for a 1970 Dart. I prefer a front bucket seat setup, but will consider bench style. I want to complete a set that I have as a couple of my covers are torn. I believe the parts that need to be replaced are for the rear seats, but would like to...

I'm looking for an original 340 stock crankshaft damper bolt and washer for a forged crank with the correct head markings. I believe the bolt head is 1 1/8" HEX.

Hi - I'm looking for an original 340 single groove crankshaft pulley. Please message me, if you have one available. The crank is forged and the year of the vehicle is 1970.

I'm looking for a pair of original 340 leaf springs (part number is 2835064).