Search results for query: *

Hi all I'm looking for 5 or more A Body LH front disk lug studs Kelsey Hayes 67-72 I would prefer NOS or NORS but good used might be ok for the right price I know I can get right hand studs new. I'm just weird, I love the LH lug studs!

I'm missing a bottom leaf from my spring pack One of the bottom (smallest) leaf from a 2835056 (68 Formula S) leaf pack is hanging out with a sock somewhere. My media blaster has given up trying to find it. Let me know what you have. I would entertain a bottom spring from a different pack as...

Hi all, I'm looking for a set of 67-68 Dart GTS Fender Letters. They can be in rough shape for the right price. I need them to mark out the holes on the fenders so having the posts or at least most of both post on each letter is needed. I would prefer OEM but aftermarket that are hollowed out...

67-69 Barracuda Rally Dash TEMP gauge (Other year / car gauge is fine as long as swing and the needle are the same as 67-69) A buddy is looking for a functioning TEMP Gauge face plate can be less than stellar, He will change it to his if need be. Let me know what you have. Thank Dana

Im missing a bottom leaf from my spring pack One of the bottom (smallest) leafs from a 2835056 (68 Formula S) leaf pack is hanging out with a sock somewhere The blaster feels confident when they sift through their media they will find it, but I'm not holding my breath. Let me know what you...

Got my parts back from the blaster, with one exception.... One of the smallest leafs from a 2835056 (68 Formula S) leaf pack. The blaster feels confident when the soft through their media they will find it, but I'm not holding my breath. Let me know what you have. Thanks

I picked up a 68 742 center section but it needs a yoke. Let me know what you have. U joint bolt holes, u joint bearing mating surfaces and seal surfaces must be in excellent condition. I forgot to add Nut and Washer is a plus.

I really only need a fully functioning speedometer head but will entertain an entire cluster with or without the bezel. The spedo head needs to have the screw on cable connection. I have several 68 up speedo heads already and I will not be changing the cable to the later press on style Mine...

A friend is looking for 2 67 Dart backup light housings the ones that go in the bumper. Example Would prefer fully functional and good chrome. With the attaching screws and nuts The 4 corners tend to get bent from installation and over tightening. As long as they are not cracked or broken...

A friend is looking for a stock forged 340 crank (he does not want a forged 318 crank, I offered him one already) for manual trans (he could rework an automatic if need be) He has a cast crank that will need to be turned (it is currently 10 under from the factory) so he is thinking about...

I need a minimum of 1 left hand front 10" drum lug stud. (Yes I know I could change them to right-hand but I'm an odd duck like a left handed lug stud) @pete peterson

Thought I would toss this out there... I'm looking for a rear seat frame for 67 to 69 Dart Convertible (Barracuda convert MIGHT be the same frame? ) The seat back I have is very repairable. The bottom I have is mostly not there. So at a minimum I would need the rear seat bottom. Bare frame...

Hi all, Looking for a working not corroded or rusted horn set for a 67 dart. My guess is the 67 thru 69 A body will be the same. Must have the brackets and the bolts. Thanks Dana

Hi all I'm looking for a 67 Dart trunk lock and associated hardware. I know I can buy reproductions Here is the rub... As I understand it. 67 had a unique key way 68 had a different unique keyway And 69 up had another unique keyway. There was a Chrysler memo that said if a lock was...

Hi all, looking for a speedo gear housing for a 998 (904) transmission. Let me know what you have. Thanks Dana

I'm looking for a driver's side rear quarter glass for a convertible. 67 thru 69 Dart or Barracuda Prefer factory tint with factory AC sticker Part number 2604363 (same 67 thru 69) (pass side for reference) From the internet (this one is clear and casting number is a bit off of the...

Hi all, I'm in need of good used left and right A piller seal. Like this from DMT. but significantly cheaper :rolleyes: My drivers side is usable but showing its age, the pass side is crumbling. Thanks.

I'm looking for 1 to 3 backing plates I need at minimum 1 passanger side (Opposite e brake hole from one in the photo) I would also take another set. Prefer little to no rust putting. 1967 or 68 10 x 1-3/4 8-3/4 1967 and 68 (note: no piston stop tabs) 69 and up (I don't want these)...

I'm looking for 1 to 3 backing plates I need at minimum 1 passanger side (Opposite e brake hole from one in the photo) I would also take another set. Prefer little to no rust putting. 1967 or 68 10 x 1-3/4 8-3/4 1967 and 68 (note: no piston stop tabs) 69 and up (I don't want...

Hi all I'm looking for a clean sample/s of the OEM 67 - ??? slides. My intent is to reverse engineer them as the white plastic ones available from time to time do not seem to fit like the originals. I have 4 from my drivers door of my 67 Dart but they are highly warn where they slide in the...

Hi all, I'm rebuilding a dual point distributer and need the primary leads, from coil to the points. I have seen 2 versions, one is a combo lead. It goes from the coil through the dist wall then to one point than to the other point. The other version looks like it goes from the coil...

Hi all, For a project I'm working on I need hood pop springs. I'm looking for the following. 67 thru 69 Dart 67 thru 69 Barracuda 67 thru 69 Valient. I know Dart and Barracuda are different, don't know about Valient. Cheap is better! I'm mostly interested in the top 1/2 so semi rust...

Looking for 67 specific seatbelts. Dart Black Bucket seat (will consider bench for the right price)

Hi all. I'm looking for a set of rollers. They need to be able to be picked up in the Denver to Cheyenne area before this coming Wednesday. Looking for 5x4 SBP, prefer 5.5 wide OEM steel wheels, but would entertain 4.5 wide or other for the right price. And by price I'm talking cheap. The...

Hi all, I'm looking for a 67 dart gas cap. I'm going to attempt to make a fuel filler adapter for refueling. Cheap is the main criteria, quality is secondary. So if you have a dented, slightly rusted, but intact gas cap (rubber grommet not important) let me know what you have.

Hi all. Looking for a few or a bunch of 67 273 intake manifold bolts. #23 on the head. One of a few still oem red after rebuild in the 80s

How all, Looking for an OEM alternator pulley 2.5" OD (preferred) to 2.7" OD Application, 67 Dart, 273, round back alternator. I will entertain core alternators with good pulley Found a rebuilder and I have a good round back core that needs rebuilding but it has a 2 groove pulley on it...

Speed nut, one-way washer, what ever you call them I know I can get them from the hardware store, but I'm looking for the originals I also know, no one will know they are there. I'm just a little ocd that way. Let me know what you have. I'll take a few if you have more than 2 OEM...

Hi all. I'm still looking for the following: Rear trunk GT trim, upper right and lower left primarily. Would entertain full package. GT exterior door top trim, left and right. GT rocker molding trim clips. 68 front headlight bezel, cheap and poor condition is perfect. Dents are fine as long...

Hi all. I'm still looking for the following: Rear trunk GT trim, upper right and lower left primarily. Would entertain full package. GT exterior door top trim, left and right Interior seatbelts, mostly looking for the hardware so color and seat type is not important, but black and bench would...