Search results for query: *

Hello Folks It is a 1985 Roller Block with stock lifter. 302 heads Comp Camshaft XR268HR-10 Hydraulic Roller 273 Adjustable Rocker I've seen this set up somewhere but could find it. I'm looking for cup push rod with appropriate length that would go with this set up. Please advice with...

Hello Folks I'll be buying this 318 short block. The seller said it's a 1985 He stated "This was a new factory warranty replacement but never installed by owner" - What should I inspect for? This plan is just a daily driver for 1973 Plymouth Scamp with A/C, P/S, 904 transmission, and 7.25...

Hello FABO I'm looking for bottom end rebuild kits for 1973 "318". Search around and found: Engine Rebuild Kit Dodge Chrysler Mopar 318 5 2L OHV V8 1970 1973 | eBay Need advice on EngineTech. Should I or Should I not? Why? Thanks,

Hello FABO I'm thinking putting this on LA 318 for 73 Scamp. Any advice do and don't? Thanks,

Hello FABO I'm getting a pair of "302" head with 1.88" intake, 1.60" exhaust valve. Both head will have .509" spring. Heads will be bolt together with 273 rolloer rocker. I need recommend camshaft for stock bottom 318. This will be street ride and weekend cruiser. Thanks

Hello FABO Please advice bottom end rebuild kit for my 1973. Link would be helpful. This is what I gather so far. 318 stock bottom end (looking for upgrade). Something like 0.030" over 4323302 Head, open intake valve to 1.88” and exhaust to 1.60” with harden seat. 273 Roller...

Hello FABO I'm just about to mount oil pan onto an engine. Upon applying gasket and found there are gap in between (Red Arrows). Will this leak? it is a detroit Gasket. If it leak, any recommend gasket to have proper seal? Thanks,

Hello FABO I'm the the process of getting a "308" heads to the machine shop. These heads will seat on stock bottom 318, 904 transmission, and 7.25 rear. These are parts that I've been collecting so far: Procomp distributor Procomp E-Coil. Edelbrock 1406 Carburetor. Edelbrock 2176 Intake...

Duplicate, Please Remove Thanks,

Hell FABO I've read bunch of articles and threads about porting engine head, so I give it a shot. I recently acquire a set of "308" head from 1991 Ram Truck. I removed all valves and degreased the head. Visually, both heads look very decent so I didn't bother to take it to the shop to check for...

Hello FABO I just bought a 4323302 head from Junk Yard. I was pull out from a 87 Dodge Ram150. It has stock 1.78" Intake and 1.50" Exhaust. I want to have machine shop to bore Intake to 1.88" and 1.60" for the Exhaust. Could I use "used 1.88" intake and 1.60" exhaust from a 360 head or I...

Hello FABO I've been reading alot of 318 engine with 360 heads. I found late model 1998 5.9 360 heads. Just want to ensure will it fit 1973 318 Engine before I make purchase. Thanks, Scamp

hello FABO Has any one tried this setup for stock or modified 318 yet? What is the pro and con of this set up? http://www.ebay.com/itm/290777249130?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Thanks 73scamp