Search results for query: *

I am curious how much difference does let’s say 30-40 cfm of head flow make in HP. Example: N/A small block 416 cu. 11.5 / 1 +/- compression With a set of heads that flow 325 +/- compared to heads that flow 293 +/- Everything else on the engine would be the same,intake,carb(s)...

I'm looking for solid roller lifters for an upcoming build and would like to hear from those who have knowledge on these. Mechanical Roller Lifters - Small Block Chrysler (273-360) | Borowski Race Engines What are the best lifters for our small blocks at this time? Thanks in advance.

Looking for opinions from the engine builders. I purchased a 1970 340 recently. .030 over, while checking deck height I found the following. Checked using a deck bridge / dial indicator. All numbers are pistons above deck. Planning on Cometic mls head gaskets and wanting to take advantage of...

I recently purchased a short block and am trying to identify the cam. I was told that it is a solid lifter cam. Am I correct that it is a Comp Cams 294s grind? What do the markings signify? 294s-10, um2083-05 , Red paint? Thank you all for your input.

Hello FABO family, I’m looking at a 1989 360 engine this weekend and would like some information on this specific year. From the research I have done so far it looks like a hyd roller engine before the magnums were introduced. What’s your thoughts on this for a 408 candidate? Pros and cons...

I bought a '69 340 about a year ago that was said to have approx. 12k miles since a rebuild. The previous owner acquired it with a car he bought and really didn't know many details of the engine. He did say it is 11;1 CR. I installed it and ran it this past summer and just pulled it today for...