Search results for query: *

Hi guys on my 426sb from hughes i have some problems with my spark plugs, hughes engines says i need NGK R5671A-9 When i run my engine at idle about 5to 10minutes and i want to start it again a day after i have wet spark plugs, i have my mixture screws a 3/4 turn off, with a half turn i dont...

My msd 6 plus was not working and the red led shows up, i took the box to an electronics engineer he told me that one fuse was gone and a resistor now he is wondering were i can find them replacement parts? There are no numbern on it Thx Peter

Hi guys can u tell me please for what that marked wire on my steering column is? thx alot Peter

I have a 426 small block stroker(360 magnum) i had installed this spark plugs ngk R5671A-10 I have this engine http://www.hughesengines.com/TechArticles/4feb2008smallblock426strokerdynotest.php now i found out that those spark plugs are for nos injection, i had adjust my carb more lean then...

Hi guys i have a brand new engine wiring harness for my 72 duster, somethimes i had problems that the engine dont start up, even i couldnt crank it, no electric there, then i touched the fusible link and it worked, but now when i do my +cable to the battery without ignition on, it smoked near...

Hey guys i get headache i installed everything new now, the distributor another coil new wires.. i also tried the new distributor without the msd box , that i can get sure everything is correct i still dont have a good spark, every 2 seconds just a little spark i also checked with the ohm...

Hi guys i installed my msd 6 and mostely everything is clear for me with the comming instruction, but one wire it says i have to put it to 12V+ Ignition key, is the 12V now the ignition 12V run position or the 12V start position from my ignition key?? I dont use the ballast restistor Thx Peter

Hi guys i have a msd distributor with the 6 AL box is it right that i dont need a ballast restistor for this one? Thx Peter

Hi guys i got this ignition coil and i want to have some tips where i could put this coil anywhere on my engine, because i dont want to make holes in my fender, maybe some of you have installed that one allready! And pics would help thx Peter