Search results for query: *

Nice used pistons. Rods have been re-sized with sps bolts. $250 plus shipping for all of it Located in South Florida

I got this with an engine i parted out. It was remaned, has the sticker on it still. $50obo plus shipping located in South Florida 34990

Just finished taking apart a perfect running 273 engine. All im keeping is the valve covers, crank shaft, and rockers. located in South Florida -34990 Useable parts- 1- Perfect STD bore 1966 273 Block $100 plus shipping 8- Rods and std. pistons w/floating pins $40 plus shipping 1- Early A-body...

Factory Forged 6.1 Hemi crankshaft. Was going to swap into a 5.7, but ended up going a different direction. Could use a polish, but very useable. Located in South Florida $400 plus the ride! Keywords- Dodge SRT8 Chrysler SRT Gen3 Hemi

Rebuilt for 727 specialties. Was custom stalled for a 904 trans my buddy had built, ended up going with a 10in converter. I have the invoice for serious buyers. This converter has 0 miles on it! Located in south florida! $250 shipped!

I have two intakes. One has a throttle body, one doesnt. Located in south florida. $100obo plus shipping

Pistons, factory Rods, forged factory crank. Pistons look to be new, very low use. Crank will need to be turned. The crank is still std/std. Forged TRW done pistons 7023P .060 bore. $450 and ill split shipping in the lower 48. Im located in South Florida.

Brand stinkin New! Cast aluminum B-1 valve covers. Bolted down, engine was never fired. Have bolt down breather tubes installed, with K&N breathers. They will need a good bath before use. Jegs gets $240. Buy these for $180 shipped! Located in South Florida

Missing the cover first off, but the shifter is in very good shape. Cable has a crack in the plastic cover but fixable! Comes with line lock button. $200 ill cover shipping . Located in South Florida

This one is an odd ball. I have a 73’ 340 block that is std bore (4.040) but it came out of a boat. There are no stampings on the oil pan rail. And on the front of the block is stamped 340 CCW. It was NOT raw water cooled. The boat has heat exchangers. So its in rather good shape. I believe it...

FIRST OFF, this thing is cracked!! But i think it can be fixed. Located in South Florida. id like to get $50 plus shipped

Ok, im clearing out my collection. Trying to fund some other projects so heres what i have. Everything is in super good shape, so rust, nicks, rough edges, nothing. Clean and install! I also have a set of howards solid roller lifters for a small block also if someone wants a cam/lifter package...

This one is an odd ball. I have a 73’ 340 block that is std bore (4.040) but it came out of a boat. There are no stampings on the oil pan rail. And on the front of the block is stamped 340 CCW. It was NOT raw water cooled. The boat has heat exchangers. So its in rather good shape. It will need...

Hey all, ive decided to sell off some parts ive been collecting. So here it is- 2006 5.7 Block from a charger, bare block. 2013 Eagle 5.7 Heads 6.1 Forged crank 2006 Stock 5.7 cam, good for regrind. $1200 for all of it, id perfer local pickup, but i can ship it. located in south florida-

These are 4.060 and for 4” stroke BRAND NEW IN THE ORIGINAL BOX!! 1.460 compression height. 2618 Alloy Gas ported 68cc head- 13.3 to 1 compression p/n K0011B6 Really bad to the bone pistons. Rings included!! Id like to get $450 plus shipping LOCATED IN SOUTH FLORIDA I will be pictures this...

Hey all, ive got a 440 forged crank with all the work done too it ( mains turned down, fresh .010 under on the rods and counter weights downed down .150 on a lathe) A set of KB215 pistons hung on a set of 400 rods with polished beams and ARP bolts. Brand new neutral balance balancer and...

Ok, im clearing out my collection. Trying to fund some other projects so heres what i have. Everything is in super good shape, so rust, nicks, rough edges, nothing. Clean and install! I also have a set of howards solid roller lifters for a small block also if someone wants a cam/lifter package...

I got these a few months ago from another member. I thought my brother could use them but his block had been bored to .060 over already. So im posting these back up forsale. Located in south florida 34990. $300 shipped in the 48.

Less than 500 miles on this unit. Comes with hughes racing magnum style lifters with no tie bars. I had this in a 1990 360 block with a roller tray and it worked great. Also this cam has the short snout for a LA block. Located in south florida. $250obo plus shipping

These were new, only used for mock up. I actually have two sets of them! Located in south florida. $150 plus shipping!

Hey everyone, ive got one EQ318A head with stainless valve upgrade. Magnum intake pattern and rockers. This was on a running 360. Other head had a broken valve and didnt look good at all! Id like to get $200 plus shipping. Thanks FABO!! Located in south FL

Mild steel, for W-9 heads. $80 and free shipping in the 48 states!!

These are the A-body race headers, with the slip tube on the drivers side. 1 7/8 tubes, in really good shape. They do have some clearance areas that i did around the tie rods. Located in South Florida. $300 plus shipping.

i got these awhile back with dreams of building a turbo 340. These are really trick CP super stock pistons. M5CP is the part number- 1.717 compression height is what i measured 2618 alloy .043 top ring w/spacer ring 5/64 second. For a full rundown on the specs, just call CP. They are very...

this was on an engine in my buddies truck for 5-6 hrs. Literally brand new, with dipstick $185. Plus shipping, located in south florida

These might have 5-6hrs run time. My buddy had them, the valve covers, and the oil pan i have listed on a 5.9 for two days before finding out the block was cracked. The indys have 2.02 intake valves, screw in studs, guide plates, and 1.7 roller rockers. Springs will carry a .520 hydraulic...

These were on an engine for two days. Found out the block was cracked. $125 plus shipping! Located in south florida!

Very low milage engine but it was hydro locked. Block is junk, 2 broken connecting rods, Heres what i have- 2 heads, Eagle 5.7 heads in good shape. Id replace the valves just to be safe. $350 Rocker gear $50- SOLD Pushrods $5 Charger Manifolds - $40 Valve covers $20- SOLD Plastic passenger car...

I think these are scumacher tri-y headers for a dakota or ram? I dunno, but they were chrome finish, in great shape too. Ill do $80 plus shipping. Thanks!

Got these with turbo intentions, but not going to use them. 2 1/2” collector, $40 and shipping