Search results for query: *

I have a nice Holley 600 cfm vac secondary carb. #80457-12 Electric choke. I haven’t run this carb but it is very clean inside and looks like it was lightly used. New at Summit is 499.00...

I have a Holley 2 barrel carb from a 1974 360 truck engine that was running before I pulled and drained the carb several years ago. It’s a 600 cfm R6860A, it should be gone through before using so, I’m considering it as a core. It has been in dry storage after draining. Asking 50.00 plus...

Mopar P/N 3691917 fan shroud Looks like it is for 1974 and up slant six Shroud is in nice condition with no chips or cracks. Asking 60.00 plus actual shipping from 80534. I can ship through Pirate ship for a discounted price.

I have some a/c parts that I pulled from my slant six ‘67 Barracuda 8-10 years ago. Can’t see throwing them away. Shipping will be high because of weight/ size of box or crate. Asking 50.00 since I have to put a price on it. Free for local pickup (@Dana67Dart ) any interest? Only asking $ to...

Two barrel intake and carb from an early 70’s 360. I believe it’s original to the 360 I had but not 100% sure. It was running several years ago when I bought it, drained the carb and lt’s been on the shelf since. Asking 100.00 OBO plus actual shipping from 80534

MSD Street Fire CDI I marked this sold recently while I was working out a bug with a new ignition. That issue is solved so I’ve decided to put it up for sale again. I’ve used this for about 4-5 years Probably 20-30 hrs run time total. Works great, just upgrading. New cost 220, asking 120...

I have a new in the box Speedmaster PCE 393 1036 mini starter up for sale. New cost approximately 140.00 Asking 110.00 shipped to the lower 48 Mopar Chrysler SB 318 340 360 383 440 Mini High-Torque 4Hp Starter [Black]

I have a good 1977 727 small block transmission with a TCI Breakaway converter p/n 141200. The converter new cost is approximately 550.00 2400-2600 approximate stall. I’ve run this in my Barracuda for about 2-3 years behind a stock stroke 400HP 340. No issues, just upgrading...

I have a 22” 3 core Champion aluminum radiator, shroud and 16” Spal fan. Auto trans. I’ve have used this in my ‘67 Barracuda for about 4-5 years. R/H side water pump outlet. Will fit other A-Bodies The fan motor has some minor rub marks that do not affect operation. I moved the mount brackets...

I have a never used Cold Case 22” shroud with 16” fan. New costs approximately 220.00 Asking 150.00 plus actual shipping from 80534. I use Pirate Ship so rates are usually very reasonable.

MSD Street Fire CDI I’ve used this for about 4-5 years Probably 20-30 hrs run time total. Works great, just upgrading. New cost 220, asking 120 shipped anywhere in the lower 48. I can email or text video of it running. MSD Ignition 5520 MSD Street Fire CD Ignitions | Summit Racing

I have a 6 qt. Kevko oil pan M301KO for small blocks. (7Qts. Total) Dyno time only, the website says you may have to notch the K frame to fit. I have a spool mount K frame and the pan is 1/4 inch too wide. A older K frame or aftermarket type may fit. ( I could not remove any more material...

I have a CVC torque converter that was setup for a 360. I removed the weight and ran it on my 340 for one summer (400-500 miles). This is a 2250 - 2450 stall behind a 340. This was new when installed. I purchased it here [SOLD] - 727 Torque Converter Asking 100 plus shipping from 80534.

I have a 1970 340 engine with 680 miles on it since being rebuilt. This was professionally built by a well-known stock/super stock NHRA builder. It is a solid roller cam with Harland Sharp rockers. The one and ONLY issue with this engine is we made the decision (which I regret now) to not bush...

Main bolt set from my ‘70 340. I will clean them up with a wire brush and oil them before I ship them. Asking 65.00 shipped to the lower 48.

New in box ARP main stud kit with windage tray p/n 240-5501. ARP lists as all Mopar V8 w/windage tray main stud kit. Summit Racing sells for approximately 119.00 https://www.summitracing.com/parts/arp-240-5501?srsltid=AfmBOoq-RZP6enf-T0mGWTe2BXNVHhAYvFG4NiGHlKAEGvV8O-ITh_Rc Asking 100.00...

I have a new-in-box UEM Icon premium forged piston kit for a 416 stroker. ( +.030 340 ). This includes the pistons, pins, and rings. I had to go another .010 (+.040 ) with my engine so I purchased another set. Piston p/n IC744.070, rings 4000BD8.070 Normal retail is 665.00 +/- plus tax, etc...

I have a very nice small block timing cover that is cleaned and ready to use. Part number 3769966 Dated 1978 Timing marks on the drivers side. It will ship in a 13.5"x 13"x 3.5" box. Asking 50.00 plus actual shipping from 805334

I have a very nice complete six-pack setup for sale. The carbs have been rebuilt, including new diaphragms. The fuel lines and linkage are complete. I have a spring kit for the vacuum pods. I did save all the old components for the carbs that were replaced. This includes the air cleaner...

I have three nice OEM sbm dist hold down brackets. Asking 15.00 ea. plus’s shipping from 80534. OR, Take all three for 40.00 plus shipping

I have a very nice small block timing cover that is cleaned and ready to use. Part number 3769966 Dated 1978 Timing marks on the drivers side. It will ship in a 13.5"x 13"x 3.5" box. Asking 50.00 plus actual shipping from 805334

Holley 80508-7 750 cfm, vacuum secondary , electric choke. This carb was pulled a few years ago and drained properly. Ran good. Average price new is 477.00 https://www.holley.com/products/fuel_systems/carburetors/street/parts/0-80508S Asking 250.00 shipped in the lower 48. Should be able to...

Holley 670 Street Avenger 80670-3 It’s been a few years since running this carb but it was a good carb. I drained it properly when removed and has been stored dry. Should be able to bolt on and tune for your altitude. Average price new is 620.00...

I have three nice OEM sbm dist hold down brackets. Asking 15.00 ea. plus’s shipping from 80534. OR, Take all three for 40.00 plus shipping.

I have a very nice small block timing cover that is cleaned and ready to use. Part number 3769966 Dated 1978 Timing marks on the drivers side. It will ship in a 13.5"x 13"x 3.5" box. Asking 60.00 plus shipping from 80534

I have a very nice aluminum 90 degree oil filter adapter that I will not be using. P/N 3690743. It appears to have been polished. It has the bolt with the staggered holes. Asking 90.00 shipped from 80534 to the lower 48 and will ship to other locations for the additional cost of shipping...

I have a very nice complete six-pack setup for sale. The carbs have been rebuilt, including new diaphragms. The fuel lines and linkage are complete. I have a spring kit for the vacuum pods. I did save all the old components for the carbs that were replaced. This includes the air cleaner...

I have a few misc. left over kick down brackets and rods. Asking 40.00 plus actual shipping from 80534.

I have a nice 489 case 3.23:1 dated 1972 cone-type sure-grip center section for sale. I have been running this in my car for the last several years with zero issues. The only reason I'm selling it is I've decided to stick with the 3.55's I have. The pinion snubber has been sold. I marked this...

I have a new-in-box UEM Icon premium forged piston kit for a 416 stroker. ( +.030 340 ). This includes the pistons, pins, and rings. I had to go another .010 (+.040 ) with my engine so I purchased another set. Piston p/n IC744.070, rings 4000BD8.070 Normal retail is 843 +/- plus tax, etc. I...