Search results for query: *

Hi there. I am cleaning out the garages of all my extra parts so please check out my other listings as well. I am selling a set of rebuildable 1967 (one year only) closed chamber, big valve, big block heads along with the rockers, set of used push rods, heat shields, valve covers etc. (see...

Up for sale is a used but in very good condition, ready to install 742 case 8.75" third member with 4.88 Mopar ring and pinion. The ring is clearly marked 4.89 (4.88), the ring is marked: "1675496 489 1 S291 4 68 MIX 2". I purchased to put on shelf but shelf is full so time to go. The ring...

Up for sale is a recently rebuilt and ready to install 742 case 8.75" third member with 4.88 Mopar ring and pinion. This center section was rebuilt for previous owner but was never installed. He sold it to me as he was told that it was a 410 gear but as I pointed out to him, the ring is...

I am selling off all extra parts for my hobby cars to try and keep the house a bit longer. Here is a 440 short block dated 1971 ready for rebuild. This is an internally balanced forged steel crank standard cylinder bore engine, hydraulic lifters are still in place. Casting number on side of...

I am selling off all extra parts for my hobby cars to try and keep the house a bit longer. Here is a factory replacement 318 2bbl Engine with approximately 50K miles on it. I removed it from a 1967 Plymouth Satilite recently and was going to install in a Duster that I'm building but keeping a...

Here is a very good ring and pinion for the #742 8.75" case complete with three shims. Shows little wear, nice sharp edges on ring and pinion teeth. Ring number is 2852938-3.21 7 27 87 1 D Pinion numbers is 3507915-3.23 $100 shipped to lower 48, Paypal is fine, you pay their fees. Send me...

Here is a used oil filler neck and cap used on any engine but were most popular on cop car engines for easy oil filling. Gasket is dry but might come back with silicone. Install in place of oil cap on valve cover for easier fill. $25 shipped to lower 48. Paypal is fine, you pay their fees...

Here is a great shape used set of adj. rockers, shafts, spacers and cupped end pushrods for small block engines running solid lifters and cams. $110 shipped to lower 48. I do accept Paypal, you will need to pick up their fees however. Send me a PM with interest.

Click on or cut and past link to browser for additional details http://www.ebay.com/itm/261262739453?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_637wt_1399 A-Body housing with relocated perches, SBP Axles and 10"x1.75" drum brakes w/o drums. If someone on FABO wants this, I...

I am busy getting rid of contents of sheds and garages. Here is a rear end housing out of a Plymouth/Dodge from 1964-67 B-Body cars such as Satilite, Coronet, Charger and is considered the "narrow" B-Body rear. Housing measures 54.25" as measured from the outside face of the axle tube flange...

Click on or cut and paste link for information on Ebay listing. http://www.ebay.com/itm/261253166063?item=261253166063&viewitem=&vxp=mtr#ht_372wt_1399 Or send me a PM and I will sell here and end auction early.

Click on or cut and paste link for Ebay listing http://www.ebay.com/itm/261253160248?item=261253160248&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr#ht_391wt_1399 Or send me a PM and I will sell here. Sold

Click on or copy and past link for description http://www.ebay.com/itm/261250957833?item=261250957833&viewitem=&vxp=mtr#ht_345wt_1399

I have listed one of my remaining 340 engines on Ebay, please click on or copy and paste the link for description. http://www.ebay.com/itm/261250918996?item=261250918996&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr#ht_799wt_1141 If you are serious about purchasing it outright, send me...

Here is a '65-'66 C-Body Big Block oil pan Part does not have a number. Comes with correct 3/8 pickup tube, sorry, no drain plug. This pan is very similar to both pan numbers 187 & 699 and will fit A-Bodies just like the other two pans. This oil pan is a must when Installing 383-440 Engine...

Here is a Big Block oil pan Part #699 (same as the #187 pan) and 3/8 pickup tube. This oil pan is a must when Installing 383-440 Engine into 1967-1975 DART, DUSTER, DEMON and Valiant or 67-69 Barracuda. All parts have been cleaned, as many dents removed as possible, bead blasted and pan has...

Here is a deep sump six quart Big Block oil pan Part #187, 3/8 pickup tube and windage tray, This oil pan is a must when Installing 383-440 Engine into 1967-1975 DART, DUSTER, DEMON and Valiant or 67-69 Barracuda. This pan has been modified by depth and baffles added. Longer dipstick is...

Here is another Big Block oil pan Part #187, 3/8 pickup tube and windage tray, This oil pan is a must when Installing 383-440 Engine into 1967-1975 DART, DUSTER, DEMON and Valiant or 67-69 Barracuda. All parts have been cleaned, as many dents removed as possible, bead blasted and pan has been...

Bick Block oil pan Part #187, 3/8 pickup tube and windage tray, This oil pan is a must when Installing 383-440 Engine into 1967-1975 DART, DUSTER, DEMON and Valiant or 67-69 Barracuda. All parts have been cleaned, as many dents removed as possible, bead blasted and pan has been primed. $90...

Going to give this another shot. This is being listed for a friend but you may reach me via PM. 8.75" rear with 11"x2" big bolt pattern drum brakes and axles with long 1/2" racing studs. Center section is a 489 housing Sure Grip center with 3.91 gear ratio. Was completely rebuilt includuing...

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

No longer for sale, am pulling out of FABO.

Sold my '67 Barracuda so am now selling off all misc pieces I collected for the car. This is an uncut air conditioned dash with uncut wiring harness out of '67 Barracuda. I purchased it last fall as a "just in case" when I had plans to restore my son's '67 but, as I am still out of work, was...

While looking past some other items in NV, I came accross a listing for a set of BB closed chamber 915 heads from 1967. Great price. Again, not mine but here is the listing on Craigslist. http://lasvegas.craigslist.org/pts/3595048979.html

I have a buddy looking for either a 1970 date code 340 intake or a very early (jan/feb) 1971 340 intake. Needs to be a Mopar original, can anyone help me with this? Send me a PM, thanx.