Search results for query: *

Howdy!! Anybody have a 4-barrel intake manifold for my poly 318? Would also consider a dual quad. Shy on the triple-two's but who knows? LOL I am local to Reno/Sacramento corridor, but otherwise you would need to ship it to me in South Lake Tahoe. Kind regards! Hunter

As the title says. Looking for a good used runner 904 for my slant. Third is blown out on my trans, I'd love something I can swap in to get her moving again before I tackle a rebuild on her original trans (when I have the time!). I'm in Tahoe, but I can drive NorCal/Nevada/Oregon for the right...

Looking for a Weiand 142/144 (or B&M of the same kind) working supercharger main body. Would consider a more complete setup if you don't want to part it out. What've you got? Thanks in advance!

Looking for the working gauges as stated above, trying to get my dash together. Thank you guys!

Hey guys! Trying to find an affordable (cheap? Haha) pair of headlight bezels for my barracuda. Just looking for no/minor dents, but driver quality. Thanks in advance! (Located in California)

Needing early A body headers (65 Barracuda), or Dutra Duals/Aussiespeed Duals. Located in Tahoe, California for shipping or local. Thanks folks!

Anyone have matched door locks & keys (2 locks) for my Barracuda? The 65-and-earlier are hard to find and I don’t have a treasury at my disposal for the NOS haha... Thanks!!

Putting my baby back together and my headlight rings are from some 70s thing, I need some proper 65 valiant or barracuda headlight rings. Thanks in advance!

Hey everybody. My transmission is blown and I don’t have $2000 to buy a rebuild. I need a 904 transmission & torque converter for my 65 barracuda, it has the bolt yoke (Converted to slip driveshaft and 8 3/4). I’m running a rebuilt 225 with a hyper pak, small ‘65 original console. Willing to...

I have a hole where my lock should be! Latch works great with a flathead but that won't do long-term. So, I'm looking for a complete trunk lock/bezel/clip, key, and rod set. I see them on ebay around $25-35, figured I'd prioritize you kind folks! (Not interested in a set that needs re-key or...

Howdy! I need a set of 4 A-body (for my 65 Barracuda) Rallye wheel center caps. Wheels are 14” with 4.5” bolt pattern. Hoping to find a set ready to mount with screws but a little paint or cleanup is fine. Located in South Lake Tahoe, CA Thanks!

Looking for an affordable front sway bar for my 65 Barracuda. Original, or aftermarket. No accessories/bushings needed. Shipping will be to zip code 96150 (Tahoe, CA). Thanks!

Missing the Driver side trim for the headliner edge, it's long and bent. My car has two identical passenger-side trims, I need a proper driver side (the bend and screw holes prevent side-swapping), thanks!! Will need shipped to California. PayPal at the ready!!

Looking for the passenger side prop/“deck lid support” assembly if I can find an affordable unit. Thanks!!

EDIT: FOUND! Thanks everyone! Looking for the knob/catch for my 65 Barracuda. This car has a magnetic cabinet closure right now and it's gotta GO! Thanks in advance, everyone!

Looking for some Early Barracuda visors and arms in black. Thanks!!

About to dive in and put 4.5/BBP disc brakes on my new little ‘65 barracuda, figure I might as well knock out the rear axle swap while I’m under there. That 7.25 SBP is just too spindly for my needs. Looking for a 8 1/4 or larger A body axle with 4.5 inch bolt pattern, gears somewhere around...

Happy Sunday! Looking to acquire a 4bbl intake manifold for my Slant Six. Good condition preferred, short-runner (can't fit Hyper-Pak with disc brake booster) so anything like Offenhauser or Aussiespeed. Paying by Paypal or meet in CA/NV Thanks in advance! (Pic is from a recent sale post here...

EDIT: FOUND! Thanks everyone! Anyone have the correct nut to lock my ignition cylinder into the dash cluster? Thank you!! I have paypal.

EDIT: FOUND! Thanks everyone! Got another A-body! WOOHOO! But... Those 13" wheels need to go, and the tires are rotten. So, Looking for 14" or 15" SBP wheels (and tires if ya got 'em!), 5 x 4" for stock Barracuda. Rallye, Cragar, Steelies, what have you got lying around? Thanks in advance...

I'm looking for a clean 2BBL aluminum intake for a Weber install on a 225 Slant Six. I'm located in California, paying by PayPal or meet in Sac/Reno. Thanks in advance!

Looking for a good runner Barracuda. Doesn't have to be pretty, but straight & rust free is good. Main wants: Console Auto preferred, but column auto OK (for the little lady to drive while road tripping) 225 or Small Block Complete trim and interior Good glass Minimal rust Running/driving or...

Picked up a REAL clean 318 2bbl LA motor, going to swap it into my '51 before I sell her (and keep the brutal 377ci SBM that's in her now). Too much motor and car's price is too high, so less motor = lower price. SO; Missing (looking to buy): -Alternator -Distributor, coil & ignition -Fuel...

I have an A body 8.25 rear end in my '51 and I want to go from 2.xx to 3.xx gears with a posi or similar, I'm in Nor-Cal...

Need it for my EFI supercharger kit. Don't love spending $260 on the MSD Pro Billet :/

Looking for a set of 60779 or 607719 Edelbrock complete Small Block assembled heads, no rocker arms needed. I'm in California. Will consider similar aluminum heads.

Looking for a Torker 2 or similar (hi-rise?) intake manifold for my 360 with EFI (I have a niiiice Edelbrock Dual-Plane to trade if ya want). Located in Bay Area of CA. Budgeted, so no Nascar-level stuff LOL thank you in advance everyone!

Lookin' for a deal on some Edelbrock Auminum small block heads, or similar. My 360 X castings are ok but one has a hole patched, I'd like to go aluminum for when I add boost... (don't bother pitching me magnum heads LOL too much work) Last set on here went for $1k shipped new in box, what have...

Need a points dizzy for my 360 small block. Prefer local/Bay Area but what have you got? Ideally an old dual points Mallory or something, must be clean and working and easy to find rotors/caps.

I am building a '51 plymouth. Have a 360/a518 in it, gotta replace the rear end with something that has an E-brake! Will accept 8.25, 8 3/4, 9", 9.25, hit me up and let me know! I have a 9.25 under the car that's too wide, could use as a partial swap if you need to keep your car rolling! Bay...