Search results for query: *

Hey guys! Looks like this radiator will not allow fitment of my supercharger (yes I am finally installing my Aussiespeed kit!). It's a spectacular radiator, runs ice cold and fit great in my 65 Barracuda. This thing solved all my overheating issues from that shitty Champion radiator. If you...

Awesome Eaton blower kit, assembled for my slant six but after mock up found it set too high due to far outboard placement on my Hyper-Pak slant six. Would work better with short runner slant six or any V6/small V8 application. Includes: Blower (M90 draw-through) Custom 4bbl adapters top &...

I've got some spares off my '65... stuff needs to go, seems I'm not gonna use it to build a truck-bed trailer like I'd wanted. Good clean 7.25 axle, stock, open, complete 4" bolt pattern. Some brake parts from the front end, plus 5 stock 13" wheels 4" bolt pattern (all have tires, some hold...

Upgraded to a hyper-pak on my car, I have two Cast iron intakes and one exhaust manifold. Exhaust Manifold has one crack on main forward log, easy weld/fix. Located in South Lake Tahoe CA (or meet in Carson NV). Intake manifold can be shipped for $25 Usps priority. Just looking for $20 per...

Got this as a test mule before my Pertronix III came for my 360. Run once for 2 mins, vacuum advance worked well. Will include free matching set of SB black wires (short, will hug block and valve covers with 90' plug ends). $65 shipped free in USA! Lose that ballast resistor! Pics from purchase...

All sold, guys, thanks!!

Hey y'all! I have the following; 273 Adjustable rockers, in excellent condition, been cleaned up and ready for use. Recent/near new studs in them, Oil holes drilled cleaned etc. Also includes brand new COMP Cams brand pushrods (stock length) for use with hydraulic lifters! Rods were $70 alone...

I have a nice 12" ProForm electric (pusher or puller, curved blades are reversible) fan, was used for about 200 miles until I went with their 15" shrouded fan on the rear instead. Cost me almost $90 from Tognotti's, I'll sell for $60 shipped free. Paypal only. Thanks! Pic for example, looks...

I have the above shackle kit, won't be using them anytime soon. $85 shipped free from Hercules, CA. Save about $20. Paypal only, thanks guys & gals! Specs from Summit: Shackles, Offset, 0.80 in. Wider, for Use with Offset Front Hangers, Dodge/Plymouth, A-Body, Kit Brand:Mopar Performance...

It's the complete Fitech inline fuel pump kit. This is new in box (onle opened to check fitment). I'm not gonna run it, my tank would need modification, so instead I'll pass it along to you guys! Save $75, I'll do $175 shipped in the US; It's about $250 shipped from Summit It will work with any...

Hey folks! Have a good deal on a darn expensive dizzy. Powers my 378ci Small Block extremely well! I can't use this with my blower setup (FITech can only control their simpler 2-wire distributor for timing retard under boost) so I'm selling this to get the basic MSD dizzy, and now someone else's...

looking to sell my FCC and install an in-tank pump instead. These things are cool as heck... any takers at $325? Under 200 run miles, from a new fuel tank with new lines (cleanest run you'll ever get used). Would also maybe trade for a nice MSD Pro Billet distributor (not RTR kind) plus cash...

I ran this rebuilt engine for a couple hundred miles, ran great. Mopar performance springs. See pics, super clean set. I'm bolting on Edelbrock heads and bigger intake so this set of big-valve heads and Torker 340 intake must go. Only flaw I could see, is a plugged (after being stripped) exhaust...

I have a grip of Mopar parts I wanna sell. MAKE OFFER on multiple parts please! I'm in the Bay Area of CA, all parts are "plus shipping" but I'd love to sell the lot for cheap to someone local. Big Block aluminum valve covers (wrinkle black & aluminum "MOPAR" performance) $100 in very good...

I have a very sharp Performer 318/360 intake I'd like to move along. I switched to single-plane and have no need for it! $135 shipped free by USPS Priority Mail in the US. All ports clean/no cracks, all threads are great! Ran well. Awesome flow with bigger 360 port heads. Will include spare...

I have a Summit 90 amp Chrome alternator for sale! Runs excellent, dual-pulley, has about 10-15 miles drive time and some idling in the driveway. Includes voltage regulator & pigtail, and will include brand new 10 foot 6-gauge wire and terminals (new uncrimped)!! Total about $165 in parts alone...

Installed in car but new & never run; Orange box ECU P4120505 Pigtail harness for above Ballast resistor Red plug wires Also included: Mopar OEM electronic distributor (vac advance working unit from prior build) with new rotor and cap All were on my 360 but never started/ran as I decided to go...

For you A body guys: Mopar original 318 (yeah 318 not 360) 4-barrel cast iron spreadbore intake $70 (ship to USA for $20 or pick it up in trade) Magnum V8 5.9 exhaust manifolds good condition no cracks $30 (will fit all small blocks, no shipping please) 2bbl Carb (Weber DGAS) with linkage and...

Headers Are block huggers and in good condition, a couple small scuffs but flange is thick and includes stainless fasteners. Won't fit with my steering box on the '51. Looking for $90 plus the ride from zip 94572

Set of two aluminum Mopar Performance valve covers, big block! Look good, straight and clean, no warp or chips on sealing surface. They had a repaint in matte black as they come new. Looking for $90 plus the ride from zip 94572. Thanks!

About to yank this '86 318 engine and I don't need the lockup 904 trans & torque convertor (I'm going with an A518). About 100k miles, rebuilt way back when, shifted like a new car. Cheap, figure someone could use it. Trade for a $40 bottle of "Glen___" scotch. Located near Martinez, CA.

This transmission is in good mechanical condition, it has been upgraded with the 340 syncros and was in a great running vehicle before the vehicle was sold. It was kept for a project that never happened. Believe is a 21 spline? I found an aluminum housing 833 (for my project '51), so this one...

I'm lookin' at some fenders on Ebay. The guy won't ship. Anyone willing to pick up a fender for my '66 and greyhound it to me in California? I'll pay for all of it, obviously! (and make it worth your time) Thanks in advance, guys! (I have no idea where else to post this!)

$34 shipped, new in box. Thanks!

Excellent shape, nylon gears look almost new. Nice piece, I decided to just use the pertronix kit instead. $49 plus $10 shipping in the US. Complete to rotor/cap. Thanks!

Loking for $35 for a standard cast-iron 1BBL intake. Pickup in Oakland, CA or ship at your expense. I have an ad up for the matching carb(s) too. Thanks guys!

Pulled the front drums and UCA's from my car, replaced with disc setup. They are operable, but should be rebuilt. Drums stopped the car just fine. Complete drums, spindles, and upper control arms for $120. Should be picked up in the bay area, shipping will be expensive.

I have a rebuilt (but needs to be flushed or cleaned) Holley 1920. Ran excellent, got gummed up and I just replaced it. Will include 2-3 more parts-or-rebuild Holley 1920's, including both twist-rod and linkage-type throttle shafts. The whole lot for $95 shipped FREE in the USA. Paypal...

Perfect for your slant six! I bought two of these, used the new one. This one is pretty clean (will need rebuild but mechanicals all function smothly), and hard to find. $120 shipped FREE in the USA. Paypal preferred, or pickup in the Bay Area CA.

I have a couple boxes of parts laying around, and it's worth my time to just unload everything instead of trying to Ebay and ship it all. Here's what you'll get: 1bbl Carburetor rebuild kit(s) Stromberg two barrel carburetor (model WW) slant six air cleaner top (from early A) 66 valiant...