Search results for query: *

I have looked around on the inter web and even in old direct connection catalogs I cannot find anything close to this? Anyone ever seen this before? It was in this oil pan which is pretty interesting , never seen a pan like this with all the trap doors in it. The Milodon I had was wide open and...

Anybody happen to know the distance from the timing cover to radiator support on a 69 dart? I am trying get a radiator for my race car & engine is out of the car right now.

Went to run in the Gamblers Race last Wednesday night, after I rolled the car out of the trailer I hit the starter button and nothing , then I see water coming out the drives side header. I am taking the heads to local machine shop to have them pressure tested, I cannot see any crack. These are...

here is what I know 4.040 bore .984 wrist pin 1/16 1/16 3/16 rings compression height around 1.50 I thought these where for stock stroke 360 3.58 but with that size C/H they seem they are for 4.00 stroke? have no idea who made them only markings are F/T with a lighting bolt cast in...

Here is what is up - I really need to Thank Brian & his Dad they are both Top Notch in my Book!! I had Brain build me a 360 the hard way with 340 Short block he had-with pistons , rods and crankshaft. This has been some what of a long process get it built. This was not do to Brians part at...

I was looking through all the parts I have in my garage and most are not junk, but they are used. So I really don't have the cash to build a stroker engine for the race car I picked up, so I am thinking I will use what I have . How much HP do you think? 1969 340block .040 over domed Arias...

I am in process in putting Duster from a Drag Car , back to a street car. Here is the way I am going -Hotckis rear springs, sway bar, rear disc brakes, front disc brakes Magnum force upper control arms with Heim ends, Feel Firm tie rod sleves , front sway bar , 920 torsion bars, flamming river...