Search results for query: *

2.5” X-pipe system. Pypes stainless steel mufflers. Came off sb with Dougs headers. Dumps just before axle. Sounds good. Mufflers clamp on, rest of system welded. Plenty of ground clearance. $200. Prefer not to ship. SW Michigan Thanks FABO.

Strange S-60 housing. A body width. New 35 spline axles, spool, bearings. Billet housing ends. Green bearings. 1350 Strange yoke. Moser aluminum girdle. 4:10 gears. Perches welded for inboard spring a body. Everything new but the housing. 1600. Buyer arranged shipping. I’ll pallet. Thanks...

Strange Dana 60. A body width. Spring perches for inboard springs. New 4.10 gears, new spool, new 35 spline axles 5x4.5” pattern and 3” screw in studs, all new bearings and 1350 forged yoke. New Moser aluminum cover/brace. This is the Strange housing without pinion snubber. $1800 obo May...

Dana 60, billet housing ends, 35spline axles/spool. Timken bearings and 1350 yoke. 4.10 gears. Everything brand new. Can make to a body length or shorter if you like. Housing is a truck unit, non hd, looks identical to factory just no pinion snubber. Powder coated and perches welded where...

Strange Dana 60 housing. 44" Axle/Axle 5.13 Richmond pro gear. Strange spool. Strange 35 spline star flange axles. 1350 Moly yolk. Has 4 link brackets etc but can be removed. Aluminum LPW cover. Should have new bearings. 4 link brackets are S&W. 26" center. 1200 obo. Located SW-Mi...

SB 727 trans. Cope deep aluminum pan, locking dipstick and street hp rebuild kit. RMVB. TCI 2800/3000 converter. Sfi flex plate, aluminum cooler. Also BM Quicksilver shifter. Newer cable. Maybe 1500 miles since rebuild. Only pulled because going to 4 speed. $500 for everything...

Set of brand new TTI 1-7/8 headers for small block. TTI340A17835-C4. Never ran, took out of and wouldn't fit our head (Brodix), then took a pic. Were $900 new. I'd like $700 plus shipping(usually $30 or so) and pretty firm on that. Will be at The Nats Located SW-MI Thanks for the ad

I have 8 used .060 over L2316 used pistons. 1 is a replacement. All look to be in good condition. No pins. They came with a car I bought. $75 shipped to lower 48. Located SW-MI. Thanks FABO.

Sold. Thanks FABO

Restored lower control arms off 69' Dart, fit many other years. New moog bushings, new bump stops. Media blasted, painted steel color then copied to the original line with Cosmoline and paint splotch like originally had. Also clear coated in 2 coats of PPG flattened clear. $200 shipped to...

Lightened K-member off 69' Dart, fits many other years. Media blasted, flanges trimmed, welded and finished. Inside blasted and welded as well. Tow hooks and steering mount reinforced. $300 plus shipping, usually about 30bucjs to the lower 48. I'll also have it at the Nats. Located...

CE 2620 front shocks. One has a small ding in the tube but works/adjusts fine. Very few miles. $100 new, $50 shipped in lower 48. Southwest Mich. Thanks FABO.

Modified K-member. Tow hooks, reinforced steering mount. Lips trimmed and welded, media blasted and inner structure welded before being boxed. For use with motor plate etc.. $350 OBO plus shipping. Thanks FABO. Located SW Mi

Off of my 68 Cuda. SBJ, had 10" drum brakes. I put new Moog ball joints and bushings and ran this setup for about a year. Arms were media blasted, epoxy primed and painted single stage urethane black. A couple little dings but otherwise still in excellent shape. $125 plus shipping...

Hemi roller cam. Older SS/AH Westcott designed piece. 109 LSA 267@,050 Intake 284@,050 exhaust $150 shipped from SW MI. Had it checked by Comp, no issues.

Dana 60 A body width 4.10 gears and 35 spline spool. Billet 1350 yoke. Billet housing ends. New 35 spline BBP axles, screw in studs, green bearings. Calvert HD perches to your spec. Everything new but housing. Uses std 2.5 offset 11" drum or aftermarket disc brakes. It is a truck housing. Not...

Dana 60. 4.10 gears with brand new 35 spline spool. 57.25 axle/axle. New axles with green bearings and 3" studs. New 1350 billet yoke, new bearings and new strange billet housing ends. Narrowed truck housing, not the HD one. $1000 OBO I can setup with disc or drum at additional cost if...

69' Dart front discs Spin freely. Calipers and what not will need rebuilt/replaced as they have been sitting. $125 plus shipping. UCA in pic can go for additional cost. Thanks FABO

I have a SB bellhousing, z bar, pedals, push rod etc out of a 69 dart. Missing some of the small stuff like clips and needs new bushings for th z bar. $250 for everything. Plus shipping Thanks FABO

383 long block for sale. Non-HP, 383D. Supposedly rebuilt in the late 80's then spun a rod. $175, located in SW MI. Delivery possible or could meet you. Thanks FABO.

I have four calipers. They are all cores/need rebuilt. I don't know much history, they came with a car I bought. $15 each, or better if you buy more. Plus shipping, should fit in a flat rate box. Located in SW MI. Thanks FABO.

A body modified k frame. Media blasted to bare metal, welded inside and out. Chrome-moly tow hooks. Steering support narrowed/boxed, uses factory gear. LCA pivot holes have no cracks and are solid. Is in primer at the moment. Plan to shoot in base/clear black-I have a couple other colors if...

Hello. 48" center to center alum driveshaft. 1350 joints with new slip yoke. Ready to bolt in. New never used. I bought from a member and won't work for me. Located SW Mi. $250 firm plus shipping or pick up. Thanks FABO

I have a set of upper control arms with new Moog ball joints and control arm bushings. The drivers side has a washer welded around the bushing hole. The control arms were bolted up, then realized I'm an idiot and needed small joints. I sandblasted them and sprayed black. Anyway $100 shipped to...

Hello. For a-body k-member. Chrome moly tube fully tig welded. Comes with all the hardware to bolt in. In bare steel, can paint if you like. Thanks FABO $130 shipped to lower 48 obo PM here. Thanks

Inner Fender Braces for the A body mopars. Come with either 1-5/8 x .083 CM or 1-5/8 x .120 MS, and 1/8 mounting plates for the shock tower and firewall. Please see pic as they are cut to fit high up against the inner fender. Mild steel kit - $80 shipped to the lower 48 Chrome-moly kit - $95...

Complete Dana 60 55" axle flange to axle flange. Excellent newer 3.73 gears, with brand new 35 spline track lock posi, never ran. All new bearings/races/seal New 35 spline axles with green bearings with 3" 1/2 screw in studs. 11" drums with all new shoes/drums/hardware/cylinders New...

Dana 60 4.10 gear with posi(unknown brand) appears to be in good condition 57" axle flange to axle flange 43-1/4 spring perch center to center New Yukon 30 spline axles 11" Drum brakes. New shoes. Drums excellent. Wheel cylinders newer, excellent shape. New front pinion seal. Should be ready to...

Centerline Auto/Drag 15x12 5x4.5 w/ 7.25 BS 2 wheels. In great shape. Just dont have the room and went to a wider wheel. Phoenix F/X 31.25x12.2x15W Slicks. Several years old. Always stored inside probably around 75-80 passes with alot left. Selling everything together for $500 OBO...

Hello. I have a set of 273 adjustable rocker arms, shafts, and pushrods for any small block. I bought them years ago and have never used them. They are in good shape and slide freely and all the adjusters move with no problems. I am missing 4 bolts and holdowns. I'll look for them but I dont...