Search results for query: *

I need the passenger side roof trim that holds the headliner up. I just need the straight over the windows piece. I have the back and front pieces. Also it need to have the clips that snap it in place. It is basically almost straight and about 3 feet long. Can slide into a small shipping tube.

Looking for a nice pair if the plastic door emblems for my 72 Demon.

Hi, I am looking for the drivers side mirror remote cable bracket and screw. This is to hold the cable so it won't hang up the window. It gets mounted to the upper front leading edge of the door under the rubber top gasket. Anybody have on??? Thanks

Hi, I am looking for an original set of black front door armrest pads with the mounting screws for my 72 Demon. I don't know which other cars have the same pad? But I do need them to be in nice condition and have the correct mounting screws with them. Send me pictures of what you have and...

I am looking for the trim clips that go on the metal interior trim that captures the edge of the roof panel and finishes off the area from the a-pillar to the rear metal sailpanel. I need 4 of the clips. I also am in need of 4 of the front door armrest base screws. They are large sheetmetal...

Hi, I am looking for (4) of the large screws which secure the armrest and plastic plate to the front door of my Demon?

Hi, I am looking for a dash harness plug for my 72 demon which I can plug my 2 speed wiper motor switch into. This is not the harness on the motor but the harness under the dash that the actual wiper switch plugs into. Thanks....

I am missing the drivers side small black plastic shield and the 2 clips that hold it on in the rear lower area of the window. The clips fasten to the sheetmetel of the car and I believe the shield is to keep any rain or water from entering the vehicle and just directs the water into the...

Missing the studs/nuts for the fender extensions on my 72 Demon. They are what I believe to be 10-24 threaded studs that have a blank starter end on each end. Then there is the matching nuts which appear to be sheetmetal acorn type with threads. I am looking for about 6 of these. I know I...

I am in need of the drivers side headlight end section of a 70 71 or 72 dart/demon plastic grille. If you have a trashed grille that has the end section drivers side intact, let me know how much you need to get for it or send me a picture. Thanks

Hi Folks, I have a bad gash in the front piece of driprail moulding for my 72 Demon. I am looking for just the passenger side front section with no dents. I don't mind buffing, but gashes are hard to deal with. I have a vinyl top car but I think the drop rail cap just snaps over the drip...

looking for a clean spare tire/gas tank bracket that gets welded into the spare tire well and projects thru the floor for the hanger bolts of the gas tank to hook on? If you have a clean one which you can just cut away from the rest of the wheel well I can grind away the excess.

Hi, I am working on a 72 Demon. I seem to be missing a small flat metal plate which fits over the two heater tubes as they come through the firewall. The plate has one screw hole which is located between the two tubes. Its function is to hold a foam gasket in place so no water will get...

Looking for the hanger J Hook for my 72 Demon. Also need the firewall rubber plug with the two vacuum hoses for the A/C vacuum harness. Thanks

looking for the heater box housing for a 72 demon car with a/c. looks like it is stamped 3307255 on the side by the door. Send pictures of what you have. I have one but it is cracked. Needs to be clean with no cracks.

Looking for a straight pair of bumper brackets for a 1972 Demon. Also need one of the fender braces that hooks on the bracket. Send pics and prices of what you have. Thanks

looking for a cast iron angle oil filter adapter and bolt for a 340 engine. Pictures of what you have and price please.

Hi, I am looking for a pair of 340 HiPo 69-70 exhaust manifolds for my Abody. Let me know if you can help? Thanks

Looking for the correct pair of stock motor mounts for the 72 Demon with a 340 engine. Anybody out here got a spare set they are willing to sell? Thanks

Hi, I am looking for a NOS or near NOS passenger side (right) lens for a 71 Demon grille. Also looking for a real clean black Tuff wheel with the adapter for a Demon. Also looking for a pair of paintable rallye mirrors which will fit a Demon. I guess they can be off a Duster.

I am looking for a set of OEM 8 3/4" pumpkin rear end nuts. If you have a set let me know what you have. I am also looking for the Big Bolt pattern rear brake drum backing plates for my Abody with 2 1/2" brake shoes.

Looking for a pair of 8.75 rear end Abody shock plates and U-Bolts for my 72 Demon. Send me a PM of what u have. Thanks

I am looking for the instrument cluster bezel and also the A/C-heater-radio bezel for my 72 Demon. It is a Deluxe interior, which has the woodgrain across the entire width including the glove box door. It is an A/C car. I plan on restoring them, so they just need to be not all broken. Send email...

I am in need of a complete set of the vinyl top trim for a 72 Demon. It needs to be for a full vinyl top. Thanks

Looking for the center bezel for a 72 demon for an A/C car. The bezel has the A/C hole in it with the radio hole below and the woodgrain front. Anybody have one of these.

I am looking for the sailpanel chrome trim for a 72 Demon full vinyl top. I believe it is two straight pcs with two small corner pcs. I also believe all the 70-74 Duster-Demon pcs are the same.