Search results for query: *

Hey everyone. THIS 67 Dart.... ...Has always been rough around the edges but still ran great. Lately, it won't upshift to 3rd gear. Aside from low fluid level, what else could cause this? The fluid smelled fine and the level was normal. It has a 360 4 barrel, an 8 3/4" axle too. The KD...

I am a bit behind the curve on this but it sounds interesting. I have read that the axles pulled from the Explorers have a long side and short side. It is a common thing to shorten the long side and use TWO short side axle shafts. What about buying TWO complete axles and having the axle shop...

Who here has experience with this transmission? I do know a few things about this transmission. I know that it is based on the 904 series. I would expect it to also then be shorter and lighter than a 518 model. The early models were hydraulic so they require no controller to run. I am guessing...

Hey there, I have a 1970 8 1/4" axle from a '70 Charger. The plan is to swap this into a 65 Valiant. I am aware of the difference in width but I intend to see if I can fit it in there and use 14 x 5.5 Ralleye wheels. This axle has a 2.71 ratio and I want to change it to either a 3.21 or a 3.55...

I have a 3.91 diff with a clutch type SG in it. It is quiet as can be until about 50 mph. It sounds louder at light throttle but is still there at cruise or WOT. I can be cruising along at 65 and lift off of the gas and it goes away, ease back in it and the noise comes back. The diff was rebuilt...