Search results for query: *

727/904 flexplate P4529751 AB 10" x 7/16" bolt performance converter bolt pattern - 6 bolt crank. NOS, expired SFI sticker. $65.00 including shipping within the 48 states, *****SALE PENDING***** Shipped from Florida 32117 Sorry, no PayPal.

MAIN BEARINGS - Speed Pro 120 M Std. - 360 Main Bearings (¾ groove) - (2 available) - $55.00/ea. set Speed Pro 120 M 10 - 360 Main Bearings (¾ groove) - $55.00/ea. set Clevite - MS1051P 10 – 360 Main Bearings (½ groove) - $70.00/ea. set ROD BEARINGS - Sealed Power/Federal Mogul 8-2130CP .030...

* Fel-Pro 1008 / Mopar P4349557 small block .039" head gaskets - $70.00 pr. *****SALE PENDING***** * Mr. Gasket 1121G small block .028" graphite/steel shim head gaskets - $50.00 pr. *****SALE PENDING***** * Mopar Perf. P4529751AB race flex plate NEW, expired SFI tag - $65.00 * Altronics...

Moser 8.75" Mopar axle housing back brace. # 7015, Measures 35.5" wide, NEW, light surface rust. $85.00 including shipping within the 48 states from Florida 32117 *****SALE PENDING***** Money orders accepted. Sorry, no PayPal.

* Milodon 30940 8 qt. oil pan, used VG condition, 360 application * Milodon 18345 oil pan pick-up used VG condition * Pioneer OP-72 oil pump, std. volume, NEW (Installed & removed, never run, with Grade 8 bolts & washers..) Made in USA $385.00 including shipping within the 48 states from...

742 8 3/4” center section – 5.13, 35 spline spool, billet steel 7260 yoke w/U-bolts. Lightened ring gear. Gears have low runs – 2-3 races & T&T days (Was too much for my application.). - $700.00 + shipping from Florida 32117 Sorry, no PayPal.

1) Neutral Safety Switches - NS11 & NS12 - NEW - $15.00 ea. (One of each available) 2) Speedometer gears - long stem - 28, 29 (5) & 30 tooth - $25.00 ea. 3) Speedometer gears - long stem - 33 tooth - $30.00 ea. (SALE PENDING) 4)Speedometer housings - long stem - $18.00 ea. 5) Speedometer...

3" Stainless T-bolt Exhaust Pipe Clamps - NEW from TTI 3" exhaust systems. Mfg. by Five Star Mfg. Approx. 7/8" wide. Not sure if the actual t-bolt is steel or a lower quality stainless because magnetic attraction is strong. 11 clamps total. $85.00 shipped within the 48 states. - add 2...

* Mopar Performance - 8 NOS P5249741 part # / P4532685 4340 forging, bushed I-beam connecting rods w/ARP bolts. 273 style. Approx. 710 grams each with full, original balance pads (Can be lightened.). Stronger than Eagle SIR I-beam and less expensive than Scat I-beam. - $350.00/set including...

5.13 low mileage lightened ring & pinion. U.S. Gear or Richmond. Used in a few races & T&T in 11 & 12 second footbrake cars. 7620 billet steel yoke with new u-bolts. Too much gear for my Dart and switched to a 5.13 Dana in my Aspen wagon. Run in Amsoil gear lube. $750 + shipping from 32117 in...

1) Neutral Safety Switches - NS11 & NS12 - NEW - $15.00 ea. 2) Speedometer gears - long stem - 28, 29 (5) & 30 tooth - $25.00 ea. 3) Speedometer gears - long stem - 33 tooth - $30.00 ea. 4)Speedometer housings - long stem - $18.00 ea. 5) Speedometer housing clamp/bolt set - $7.00 ea. 6)...

1) Neutral Safety Switches - NS11 & NS12 - NEW - $12.00 ea. 2) Speedometer gears - long stem - 28, 29 (5) & 30 tooth - $25.00 ea. 3) Speedometer gears - long stem - 33 tooth - $30.00 ea. 4)Speedometer housings - long stem - $16.00 ea. 5) Speedometer housing clamp/bolt set - $6.00 ea. 6)...

1) MSD 31193 8.5mm Super Conductor plug wire kit. Universal V-8, multi-angle boots, cut-to-fit. - $90.00 2) Taylor 83655 ThunderVolt 8.2 Plug Wire kit. - $60.00 ***SALE PENDING*** 3) Autometer 3232 Dual 2 5/8" gauge panel. - $20.00 4) Chassis Engineering 7410 Battery disconnect switch...

* Milodon 8 qt. oil pan 30940 * Milodon oil pan pick-up 18345 Like new, temporarily mounted but engine never installed or run. Some headers will not clear sump. TTI, Dougs & Hooker may have one that will clear. Do your homework. *****SOLD***** $300.00 including shipping within the 48 states...

Piston Rings - * Childs & Albert RS 10477-25, 4.020" bore file fit, 5/64"-5/64"-3/16", low tension - $90.00 * Childs & Albert RS 10477-45, 4.040" bore file fit, 5/64"-5/64"-3/16", low tension - $90.00 * Mahle/Perfect Circle 315-0034 .035 , 4.030" bore file fit, 5/64"-5/64"-3/16", std. tension -...

SALE PENDING on items in RED. * Mopar Performance P4529751 AB flexplate - NOS, 6 bolt crank/performance converter, expired SFI tag (good for 10.0 & slower) - $70.00 * Hughes HP1234 Locking 904 transmission dipstick assembly. NEW - $60.00 ea. (2 available) (Pending on one.) * Mopar kickdown...

* 273 rocker assemblies - Rocker arms are machined for lock-nuts and have the original Crane-style slotted adjusters. They've been cut for spring/retainer clearance and have OEM grade 5 bolts. $150.00 + shipping from 32117 (photos 1 - 4)...

Piston Rings - * Total Seal CRG 3690-45, 4.040" bore file fit, 1/16"-1/16"-3/16", low tension - $90.00 * Childs & Albert RS 10477-25, 4.020" bore file fit, 5/64"-5/64"-3/16", low tension - $90.00 * Childs & Albert RS 10477-45, 4.040" bore file fit, 5/64"-5/64"-3/16", low tension - $90.00 *...

* Aluminum Mopar Performance 8 3/4" 742 case assembly- * Only 5-10 minutes of run time on jack stands since rebuild with new gears. * 4.86 (U.S. Gear?) micro/super finished with lightened ring gear. * Moser 35 spline spool. * Mark Williams billet adjusters. * Billet steel 7260 yoke w/u-bolts *...

1) Jegs Line Lock/Stage Control 63000 (NEW) - $35.00 (SOLD) 2) Hurst Competition Shifter Knob w/button 1630050 (NEW)- $65.00 3) Hurst replacement shifter knob for Quarter Stick 1631036 (Like new) - $25.00 4) Standard NS11 and GP Sorenson NS12 Neutral Safety Switch (NEW)- $10.00 ea. 5) Hurst...

NEW Moser Dana 60 for A-Body Mopar, or ??? * Housing width - 52" * Axle flange-to-flange - approx. 56.25" * 35 spline steel spool * 35 spline axles - PRO flange - 5/8" x 2" screw-in studs - For E/B body drum brakes - 5 x 4.5" bolt pattern * 4.88 PRO/Comp gears - Lightened ring gear -...

1) Powermaster 8163 75 amp single wire race alternator. NEW - $225.00 2) Powermaster 181 aluminum, single groove, v-belt alternator pulley NEW - $20.00 (SALE PENDING) 3) Powermaster 9513 XS Torque Mopar small/big block mini-starter. NEW - $175.00 4) Milodon 15011 Premium Roller Timing...

360 2 barrel intake - OEM cast iron 3614345 Good shape, heat crossover not clogged with carbon. 340/360 ports & 1 9/16" carb throttle bores. It appears to be an early, non-EGR, pre-smog intake, but I wasn't able to find the application. Truck/RV? Engine is long gone. $40.00 + shipping from...

Richmond 4.30 gear for 8 3/4" 742 case. Low use, VG condition. (Got gears in package deal so don't have additional details.) $125.00 .....prices + shipping from Florida 32117. Sorry, no PayPal.

Aluminum 8 3/4" center assembly complete but needs gear (742 style), 35 spline Moser spool, billet steel 7260 yoke w/u-bolts & billet steel Mark Williams adjusters. $900.00 ***SALE PENDING*** Richmond 4.30 gear for 742 case. Low use, VG condition. (Got gears in package deal.) $125.00...

Assorted new small block & miscellaneous race parts: 1) Melling M-72 standard small block oil pump. $30.00 2) Milodon 34040 Brass Freeze Plug set. (2 available.) $30.00 ea. ***SALE PENDING*** 3) Milodon 15011 Premium Roller Timing Chain set. $60.00 4) Moroso 60700 5" Aluminum Crank Pulley...

All items are pending, some with 2 inquiries. Working on shipping quotes. ***Except the oil pan - still available*** 1) Holley Strip Dominator 300-8 - used, VG condition, studs work well with 1" spacer, sold as shown. $225.00 + shipping. 2) Harland Sharp 1.5 rocker arm kit/assemblies...

Miscellaneous parts for sale. Group photos at bottom. Can provide more info & photos. All prices + shipping from Florida 32117. 1 - Milodon 45225-8 1.60” MegaFlow exhaust valves, 21-4N stainless steel, 3/8” stem, 5.000” O.A. length, NEW - $125.00 2 - Milodon 45640-8 2.02” Street intake...

90* OEM cast iron LA oil filter adapter & bolt. I didn't modify the bolt. It came that way. Casting number - 2951995 Date code (?) - 3 23 1 $50.00 + shipping from Florida 32117 Sorry, no Paypal.

Harland Sharp 1.5 rocker arm kit/assemblies. S70025KE NEW (Some of the hold down clamps have some light rust blemishes.) They fit a variety of LA heads. I've used them on LA-X with 3/8" hold down bolts and OEM heads with 5/16" bolts. $675.00 (Photos 1-3) Crane 1.5 adjustable rocker arm...