Search results for query: *

Hi folks. I’m looking for a replacement for this driver’s side vent wing bracket that has a broken pivot pin. Mine is a 65 Valiant Signet but I believe they interchange with similar year Darts and Barracudas.

Looking for an Edelbrock 28155. New they are kind of pricey. Hoping somebody has a used one they aren't using and will sell cheaper than new. Or a single plane SBM LA intake that has injector bungs welded in. Thank you!

Looking for some wide steelies in 5 x 4.5 bolt pattern. 15x8 or 15x10s with a 4-4.5" backspace. Don't have to be pretty just straight and dent free. Thank you

Need a good pair of 9" front hubs from a factory 9" front drum car. Something you have left over from a BBP disk brake conversion and just sitting around. Thanks!

Looking for just the balancer and water pump, single vbelt groove. Don't have to be pretty, just straight.

Looking for new or used (useable, not trashed) drag radials. 275 or 295/15s. Prefer M/Ts but am open to Nitto or others if price and condition is right. Thanks!

Interested in a pair of Weld Draglites or knockoffs. -15x10 -Large bolt pattern -4.5-5.0" Backspace.

Looking for a pair of 15x7 wheels with 4.5 to 4.75" Backspace and large bolt pattern. Prefer aluminum wheels, like used Centerlines or Welds. I need these to mount my drag radials on. They don't have to be too pretty. I'm in S. Florida. thanks

V8 type. looking for a set or preferably just the pass side. Stainless models would be nice.

Anybody have the short spring (EFI) leftover from their carb install with an Aeromotive 13301 Fuel Pressure Regulator?

Small block Holley street dominator 300-7. Old, single plane intake. Let me know whatcha got. Thanks!

Old school, low profile single plane. Thanks!

Something straight. Chrome doesn't have to be perfect. Thank you

47-48" driveshaft measured center to center of U joints. I understand this is a common size in 111" wheelbase As with 727 and 8 3/4. A complete one with 727 yoke and small 7260 U joints would be perfect. Thanks

Looking for a pair of decent 15x7 factory type steelies for the back of my car. Large bolt pattern. Would consider cop car wheels as well. Shipped to 33186 thank you

Shipped to 33186 thank you

Looking for a decent single groove water pump and balancer pulley set. I'm using the later model aluminum water pump/timing cover on my 5.9 Magnum. Don't need anything perfect. Just something straight, matching and can be cleaned up. thanks!

One of these. Factory type for 5.2 or 5.9 Magnums. I lost one. Thanks!

Neutral balanced 727 converter. Something in the 2800-3000 RPM range behind a small block, standard stroke 360 Magnum. thanks!

Like the title says. With shipping to 33186. Thank you

Front valance from Barracuda or Valiant 1964 or 1965 should work. Let me know what you have and send some pics. I'm located in Miami, Fl. 33186 Thank you

I'm looking for a front passenger side fender for a 65 Valiant or similar Barracuda. I believe 64-65 Barracuda fenders are the same. 64 Valiant will not work, the diagonal line is a little different. Something clean, not too dinged up or too rusty. I have a nice pair of rust free 64 Valiant...

Looking for short block, block alone or block and crank. I need something already bored 30 over and ready to go as far as machine work or that maybe just needs to be honed. Prefer early LA block. And this is probably really pushing it...something in South Florida but willing to take something...

Looking for hub only, no drum or other hardware. This is for a 9" drum car. 1965 A-body. Need shipped to 33186. Thank you

Anything in decent shape. Shipped to 33186. Interested in headlight ring, lower valance and grill as well. Will consider a pair of '64 fenders if the price is right. Thanks!

Looking for a full set of 4 for my Valiant. The 14" x 4.5" if possible. Small bolt pattern. Accompanying dog dishes in decent shape would be nice. Shipping to 33186 thank you

Howdy FAB0ers- Long time reader, first time poster. I'm located in S. Florida and am looking for a turn-key cruiser and something I can take to the local 1/8 mile track at times and run. I prefer 64-65 Valiants but will consider a 63 or 66. I need something drivable and that I can maybe bolt...