Search results for query: *

explorer 8.8 rear end. factory disc brake, 4.10 gear ratio with trac-loc posi. 31 spline axles. has had the drivers side tube narrowed 3 inches, new axle shaft. has new spring perches welded on at 43 inch centers for A-body. axle is 57.250 wheel mounting surface to wheel mounting surface. comes...

rear end is 2.94 geared open. has 10 X 2 1/2" brakes. comes complete drum to drum in a 37K original mile car. still in car so you can check it out before it's pulled. does NOT come with sock plates, nor are they for sale. i am selling the 318/904 out of this car, but, NO other parts of the car...

1973 model 318 engine and 904 automatic transmission in a plymouth scamp. stone stock, car has 37,*** miles. car sat for many years until recently. starts runs and pulls as it should. no smoke, noises, etc. still in the car so you can check it all out before you pull it. does NOT include...

i have a good, used, ready to use or for build-ups, 8 3/4 chrysler 3rd-member hoghead. its a "489" case, 3.23 gears with sure-grip and large yoke. price is $700 plus the shipping. i am located in henderson,ky 42420 thanks for looking

i have a vintage DP4B aluminum edelbrock 4 barrel intake for 383-400 low-deck. clean, flat, has been mounted and ran in the past. no striped carb stud holes, no heli-coils. look at the pics, ask questions. $200 plus the ride

small block aluminum edelbrock vintage LD4B 4 barrel intake in great shape, been on the shelf for years. one of the best small mopar intakes made for street duty. clean and flat, no stripped carb stud holes, no heli-coils $300. plus the ride

i have a brand new in the box, only removed for pics, Mopar M1 single plane intake for small block chrysler. been on the shelf for year. pat #4532851. great street ir strip intake. even comes with the fel-pro intake gaskets from mopar performance. $300 plus the ride

have a set of 340 pistons and rods. they were removed from a 71 model 340, standard bore, 4-valve relief, "645" rods. clean skirts, 7 pistons are original, 1 is an aftermarket with a broken skirt. price is $100 plus shipping. thanks

1972, model removed from a 37,*** mile B300 1-ton maxi-van. drove when pulled includes stock torque converter. been stored in a dry pole barn for 5 years. $350 obo.

1972 model industrial red 318 engine. stone stock, removed from a 37,*** mile dodge 1-ton maxi-van. turns over easily by hand. everything is here except air cleaner, wp pulley and fan. been kept inside poll barn storage for 5 years. look at the pics, ask questions. $250 .message here

1967, removed from a 47,*** mile imperial. drove when pulled, includes stock torque converter. been stored in a dry polebarn over 20 years. $250. can ship fastenal 3PL. go online and get a free quote, 40"X48" pallet, #150. PM here. thanks for looking

i have a 1967 440 builder. 3-27-67 casting date, standard bore, .0015 taper top to bottom of cylinders, ring ridge is .003-.004. bores would easily c;lean up at .010 over bore. no scars or damage. does come with the stock pistons and rods, just didn't get them in the pics. factory forged crank...

brand new out of box, opened to install in engine, never used it, mopar performance 292/509 purple shaft flat-tappet hydraulic cam and lifters. part number is Camshaft Kit P4120237AE. cam is for big block mopar. price is $300, call or text 2708602323

Professional Products 70026 Powerjection III Satin Finish EFI System. was bought about a year ago and setup on a small-block combo in a boat. wasn't fast enough, went with a completely different engine combo. this is a self-learning/adapting 750cfm setup. it also comes with the computer/usb...

742 case, 2.76 open diff. came from a daily driving car, been in dry storage on a shelf. small yolk. $125 plus shipping. to possibly stop future whiners and cryers from messaging, asking "how much is shipping to XXXXX", the box is 16x12x12 and weighs 80 lbs. so, you can calculate your own...

holley vacuum secondary 750 cfm 4 barrel carb. manual choke. list number 3310-3. fits squarebore intakes. all stock jetting. no issues. removed from a daily driver to go to a smaller carb.. $125 plus shipping

list number 1850-2 holley 600 4 barrel acrb with manual choke. removed from a daily driving pickup last fall. been in my garage on a shelf. ran great with no issues. .$100 plus shipping.

741 case. small yoke. 2.94 open carrier. in good shape, no bearing noise. came from daily driving car. no damage or issues. price is $100 plus shipping. thanks. to possibly stop future whiners and cryers from messaging, asking "how much is shipping to XXXXX", the box is 16x12x12 and weighs 80...

have here a set of 340 pistons and rods. they were removed from a 71 model 340, standard bore, 4-valve relief, "645" rods. clean skirts, 7 pistons are original, 1 is an aftermarket with a broken skirt. $100 plus shipping. message here, call or text 2708602323

have a pair of big block valve covers. were on a 69 model 383 when i got them. don't know what they are original to. look at the pics. $75.00 plus the ride. call or text 2708602323

cast iron, factory 4-barrel intake. was on a 69 383 when i got it. doubt its orginal, look at the part number in pics. no damage. excellent shape. $75.00 plus the ride. call or text 2708602323. thanks.

factory chrome small block valve covers. cant remember what they came on.used, in nice shape. not all rusty or beat up. comes with grommets, cap, and bolts. $100 shipped in lower 48 states. message here, call or text 2708602323

a nice used edelbrock torker TM6 intake. no damage or stripped threads. comes with carb studs. $125 shipped in lower 48 states. message here, call or text 2708602323.

nice set of used moroso gold anodized valve covers for big block. not all banged or chewed yp. have grommets and breathers, and the moroso "T" bolts. dirty from lying around on the shelf. $120 shipped in lower 48 states. message here, call or text 2708602323

as title says, edelbrock performer RPM aluminum heads for big block. they have the 75cc chambers, have had bowl blending, clean-up on intake and exhaust. had about 15-20 passes on them, when bottom end gave up the ghost. price is $1100 shipped in lower 48 states. call, text 2708602323 or message...

new in box, hughes whiplash series cam, lifters and valve springs for big block. look at the pics, shows grind number and specs. also shown is the receipt, cost $410 all together. selling for $225 shipped in lower 48. call or text 2708602323 or message here.

like new, ran for 2 months , barry grant speed demon 750cfm 4 barrel carb.vacuum secondary .electric choke. model number 1402020VE. all stock jetting. no issues. removed from a daily driver to go to a bigger carb. it is used. these are well over $550 new. price is $250 plus shipping in lower 48...

brand new in box, only opened for pics. comp cams xtreme energy series flat-tappet hydraulic cam, lifters and matching valve springs. cam is the XE-274H grind. look up specs on summit or jegs. part numbers are in the pics. for small block mopar these are $303 from summit. price is $200...

i have a 1976 small block 727 automatic transmission. was recently removed from a great running/driving D200 pickup truck. was going straight into service in a project, that has since went big-block. comes with torque converter and dipstick with tube. ready to bolt in and use. i personnaly drove...

have a 1971 440 engine. intake to pan, pulleys to flexplate. NON-hp, casting date of 7-24-70, removed from a running/driving 71 new yorker years ago, stored inside. has "346" heads on it. all standard. price is $850.call or text 2708602323