Search results for query: *

Bought this used, it was already cleaned up and spray paint black, in average condition, can not use as I thought I could. paid 55.90 with shipping asking 40.00 plus shipping from Northampton Pa. 18067. all 4 groove are the same dia. Dave

Have a almost full roll of 12 gauge fusible link wire for sale, was 10 ft long used less then 1 foot so there is a little more then 9 feet left, paid 9.79 looking for 7.00 and shipping from 18067, also have a gates lower rad. Hose with out a spring # 20386 the inside diameter at both ends is...

Have some left over premium header pipe wrap. I bought from jegs there part # is 555-32055, 2" wide by 15 feet long have just a litte of 9 feet leftover asking 10.00 and shipping from 18067

I have a used radiator 4016717, 18398, 25 1/2 wide and 22 high is automatic has trans cooler in it, along with the over flow returning into the top tank, both upper and lower hose conn. Are on the passenger side best to have pressure checked /recored asking 50.00 and shipping or best offer ...

my error, your gain, I ordered 2 dynomax super turbo mufflers, # 17733 which are 2.5 in and out ,inlet is offset and outlet is center paid 45.00 plus shipping asking 30.00 each plus shipping from 18067 in pa. they weight about 10lbs each. I still have the orginal boxes they came in. I know I...

Have a nice holly street dominator 4 barrel aluminum intake model # 701r-29z,330-29z for small block ,single plane ,for sale i picked up and cleaned it up ,repainted it ,asking 45.00 plus shipping from 18067 found a nice elbrock 2176 dual plane intake that i am now using

Hi, i have 1- 2 barrel air clean housing for sale for a 318 engine i think it is from a 69 ?? 10.00 but open to any offers, does not inc shipping from northampton pa 18067

Hi i know these are not a-body parts i have for sale, but i recevied them wrong from the right stuff detailing inc when i ordered my 69 cuda disc brake converison kit from them they send me the front to back stainless steel brake line kit # rkt6804s-1g-d19 which lists for 79.00 for stainless...

Hi i am in pa. 18067, have 1 set of moog upper control arm bushings brand new never used i bought the wrong kit only needed the upper control arm adjusting bolts, the kit was moog # k7030 not sure of the cost for just the bushings but shoot me an offer plus the cost of shipping from here, i all...

I am in pa zip code 18067, have for sale rear axle housing snubber for a 7-1/4 rear and the lt and rt lower shock mount brackets looking for 25.00 for all of the above parts if not sold will just junk them to clean out storage room, i installed a 8-3/4 rear axle housing in my cuda do not need...

have for sale a number of different parts for a 69 cuda,have a pair lt and rt front drum brake upper control arms, and spindles with brake drums with the lower ball joint with the small bolt pattern i just up graded my cuda to disc brake with the kit from the right stuff detailing inc.looking...

hi i have a pair of 8-3/4 sbp rear axles out of a 70 duster rear asking for 50.00 for the pair and the cost shipping from 18067

hi have 2 nice rear axles from 70 duster 8-3/4 rear has the small bolt pattern, has newer long studs,still has old style bearings looking to get 100.00 for the pair and the cost of shipping from 18067.i put new large bolt pattern axles in to my car.

hi, have both rear lower shock mounting brackets from a 69 cuda 7 1/4 rear along with the pinon snubber from the same rear, i put a 8-3/4 rear in my car. will take 30.00 for all and the cost of shiping from 18067

hi i have 3- 2 barrel carbs, from a 318 engine 1 has a rebuilt tag on it, i would think they all would need to be rebuilt looking for 30.00 for all 3.and cost of shippinh from 18067

hi, i have a pair of rear axles out of a 70 duster, 8-3/4 rear, that i installed in my 69 cuda, i had new large bolt axles from moser installed in it. to the best of my knowledge there is nothing wrong with them, asking 50.00 for the pair and the cost of shipping from northampton pa 18067.

:coffee2:i have 3- 2 barrel carbs for sale, off a 69 318,1 has a built tag on it, i do not know how long ago it was rebuilt, i would say all 3 should be rebuilt. i am asking 75.00 for all 3 and shipping cost from northampton pa 18067. i be a bit high on the price will take 60.00 or make me an offer.