Search results for query: *

ok ,here is the deal, i have a concern with the postion of the push rods in my 340, they are all very close to the cyl. head casting , almost to the point of making contact, no where near the center of the hole in the heads. is this normal and just part of the geometry problems in these motors ...

I pulled the valve covers off the 340 today to see why the lifters are so noisey, i found the shafts were put in wrong , thats no problem to fix, my question is in the oil to the shafts, I assume oil is fed via the rocker stands. is this correct? , also is a banjo bolt used ? if so what is the...

ok here is a few things we learned 40 years ago about cam lobes failing. first of all with a flat tappet cam ,the lifter has to spin freely in the lifter bore. if the lifter cant spin the lobe fails, second is a quailty control problem, the cam lobes have a very slight angle ground into...

I cant seem to find the timing tab on my 68 340, this is an early motor, built in aug of 67, the only thing i found looks like a homemade pointer, it is a piece of wire wrapped around one of the water pump bolts, i am sure there must be something better than this, anyone know where i can get...