Search results for query: *

Looking for a flat .063 snap ring for the Forward Clutch, about 5.4" relaxed, 5.3" installed. According to trans parts online, part # is 12878A, but transend says that # is for wavy. Neither place has it though and PATC doesn't even list it. Other suggestions for sources? I am working on a42RH...

I need drivers side door latch mechanism, as long as the guides aren't all beat up from a misaligned jamb striker pin. I already got one like that. Compare top to bottom “lip” in photo Price, & shipping to Chesapeake, Va. 23323, Thanks @cudascott You had replied to a thread in 2019 that you...

I need a pair of 67-76 leaf spring hangers. I have a pair of the Hotchkis 1” lowering hangers I could trade if wanted. Combined with the Hotchkiss springs it sits a little too low for my liking. Shipping would be to 23323

Looking for 11X2.5 Rear Drum Backing Plates. Here’s how to measure Thanks to 72bluNblu Set the backing plate flat on a bench. You'll need to hang the bottom 1/3 of the backing plate off the edge of the bench so that the mounts for the e-brake cables don't keep the backing plate from sitting...

Looking for a Pair of Leaf Spring Hanger Brackets.

I have 11 x 2-1/2 drums. Somebody in the past put a spacer under the drum. If I remove the spacer, the drum scrapes against the outer lip of the backing plate. I believe, by reading other posts, that there are different backing plates and I must have the wrong ones. 2” maybe? I would just...

Got new fenders because originals were loaded w bondo & scewholes from old wreck& a lot of rust. Forgot to get little stuff like headlight springs. Not sure what oter years besides 67-76 fit, but I need a pair that looks like these. (No, I don’t expect them this shiny)

Need 2 light bulb sockets for 1968 side marker lights And 2 tail/brake light sockets (I think almost any year works for these) for 1034 or 1157 bulb if anyone has a trunk harness that aint worth a crap, I’d buy the sockets

Hi Y’all I’m looking for the 2 trim parts at the front of a vinyl top car. Example in photo. Please no pitted, rotting ones, Thanks

I need 2 good vinyl top trim pieces that go on the a-pillar. Thanks FABO

Working on a 68. Is the trim the same til 76? Missed this deal, but this is what I’m looking for. [SOLD] - vinyl top trim 1969 dart

I need to find the Aluminum "plate?" that the rear side glass mounts to that connects it to the regulator. I'm not sure of its proper name, but its the cast aluminum piece with the slots for the rollers. 1968 Dart, but I think up to 1973 is the same. Not 100% sure about that either.