Search results for query: *

I have a 75 duster and the car is not a parts car but I have decided to do a big block swap and convert it to non a/c. So anything and everything to do with the A/c is included as a complete kit. The system is still sealed however I doubt any refrigerant remains. The car has been parked for...

Aftermarket steering wheel made by superior performance products. "The 500" All hardware minus the center cap. Very vintage piece with a little bit rust peppering on the center hub area. $35. + shipping from 81006

I don't think this was an actual handle from a factory pistol grip. I suspect it was made for an automatic shifter. Came to me on a 4 speed shifter handle so it has the same fine thread as a stock four speed handle. I don't know what company made it or how you would use it. $25. Plus...

Came out of a 65 cuda, I had bought them from fabo for my valiant wagon but I can't give up the bench seat so here we are. $125 shipped in the conus.

Been in storage for a long time. 65 valiant, has the bezel and no cut wires (square buttons) $50 plus shipping 63 valiant. Has the bezel, knobs, mounting bracket and no cut wires and works. (Round buttons) $75. Plus shipping A little dusty from the storage but no rust. Ships from 81005

I have an uncut 68 barracuda dash frame. No extra holes other than factory. The bottom tabs are good but bent in for shipping. There is no vin tag on it. $100. Plus shipping from 81006

65 barracuda or valiant dash. Was from an A/C equipped car. The wiring has no cuts except one white wire that i don't know where its supposed to go. $50. Bare Frame $50. Entire Trim set $50 wiring .... was from an A/C car. Or take the whole thing for $125. All items plus shipping from...

They came out of a 63 Dart Gt. I had bought them for my valiant wagon but decided to go with a bench in a wagon. Very good rebuildable seats. Tracks included. $400. Local Pickup in Pueblo, Colorado 81006

The knob is cracked and slips off the shaft. The cable has cracks but the cable does work. If you want it send me your name and address. If I find the mech. Later, I'll save your address and send it later if i find it, I'm sure it will pop up in my clean out.

Misc. Dash trim for a 63 valiant, incomplete set, but all studs are good and very good shine PM me your name and address if you want them

Buttons are real decent Bezel is good Bracket us solid Vacuum switch is junk Send me your name and address if you want it. I don't need it because my car is non a/c and I'm tired of seeing this on my kitchen counter.

I have three of the pieces, I don't have the glove box trim. This is for a pushbutton auto car because the LH piece is the short one to fit with the pushbutton module. Three piece set in decent condition, all studs are there and usable. PM your address

Very nice vent set out of a 72 duster No cracks and all vents move freely and no broken fins. $65. Shipped in the lower 48

Instrument cluster $40. Plus shipping. Valiant 100, Bare dash frame with glove box door $100. Plus ship. Parts are still in the vehicle so allow a few days for their removal Radio plate already sold and steering wheel not for sale. Ships from 81006 paypal friendly

I have an almost complete setup in a 72 demon. Not parting the car out but changing over to non a/c. Complete minus the compressor and condenser. Also have an extra under dash vent set with no broken fins and extra controller parts. All little brackets and lines and all are there. Nickel and...

Very hard to find part. I bought it for my 64 dart GT but sold the car. All studs in tact. Would need refinish to match the rest of your dash. Completely aluminum. $150. Plus shipping

I have the piece on the right of the glove box, the piece over the radio and the piece to the left of the pushbutton module. Needs the glove box piece to be complete. These are for a 63 V-200 with pushbutton auto. Studs are good and these pieces are very nice $20. Plus shipping from 81006

I have two A/C controllers. One came out of my 72 demon when I switched to non a/c. The other came out of a 71 duster parts car. All buttons and switches move freely and sliders, slide. $75. For the whole lot plus shipping from 81006

Original hump from brewers, cost me big but I don't need it so I offered it for free to a member in a want ad with no response so I don't think I can give it away. It's good but I decided to go a different route in my 63 valiant so hopefully someone can use it. Pictures to follow Coming...

very nice door panel emblems from a very dry Colorado car and it shows. No pitting or rust ever. A light polishing and will look new. These re-pop for a lot more and the re-pops are Chinese made. These have the Chrysler part number and look almost new. All four studs are there and exactly...

misc. interior parts A And B body ....all items plus ship from 81006 I have two auto console top plates for 66-70 (correct for 69/70) one has one broken stud but chrome has no pitting and overall a nice original. $45. second one has no pitting as well and no broken studs and has shift...

auto console and some linkage. I got all this stuff as is and I don't have any auto cars so I am guessing most pieces are there, although I know only the center bracket is there. has extra shifter for parts ...it has a switch on it for some reason. Everything will need restored missing some...

nice and straight, not cut anywhere and blue. $75 + ship from 81006

THEY NEED RUST REPAIR!!! these frames were sitting in a convertible 69 dart GT without the top for years. The bottoms have pitting as shown in the pic. the tracks are builders but one is kinda bad. They need rust repair. $80. plus the ride for the set, I will separate but for the...

a set of bucket seat tracks that need rust repair. THEY NEED RUST REPAIR the one on the right hand side in the pic was on the side of the car that had the window busted out and was exposed to the elements.....that is the worst one. The others need rust repair as well but are mostly...

I have a 1972 radio / heater bezel non a/c, very hard to find part, when I was looking for one I couldn't find for anything and then I ended up buying 2 and only need one. one stud is short but otherwise all studs there and no cracks. $60. shipped. Radio delete plate. I believe this is 70-2...

A/c heater boxes ....one is a 69 one is a 71 and the other is a 73. I prefer not to ship whole units but any parts are up for grabs. (controllers and cables are gone) Shipping is a little slow. $0.00 + shipping.

I have two HURST console shifter handles. The first one (pics) is from a 68 charger and is the 68 type and very early 69 type. It was re-chromed and the chrome is brilliant. $250. + actual shipping or $260. shipped. The second one is from a 69 GTX (will add pics later) It is not re-chromed...

I have a 68 dart dash frame ....bare frame and two 69 dart dash frames available $40.00 ea. + shipping from 81006

from a 67 barracuda a full ring steering wheel. the wheel itself has no cracks but needs a re-dye Very rare option and not often seen $100. plus the ride from 81006