Search results for query: *

I have a 1971 Dart with a big block stroker in it. Had it at the shop for a top end noise and when it was hoisted on the lift we saw that the pitman arm and idler arm are hitting the headers in a bad way. the lower control arm is also rubbing a bit on my milodon oil pan. The headers are TTI...

There is quite a bit of vibration occurring in my steering column. Pulled it up a bit to change a header gasket and put everything back together in the seemingly correct way. Im not sure if it was always shaking like that or if I did something putting it back? The play where it can move is...

Recently pulled the column out a bit to change a header gasket. The splined end coming out of the manual box has a grooved channel about halfway up the splined section. I lined it up so that the little threaded hex bolt goes into that channel so that the column cant move forwards or backwards...

Anyone seen an airbag set up on a torsion bar car? Curious if anyone has pics? Thanks guys. J

Does anyone know what year and what cars had the breather vent closer the the center section on the 8 3/4 rear ends? I know its later. The earlier ones had the breather down the axle tube a bit. Just trying find what year and cars have the later a-body model 8.75. Thanks:binky:

Will a thompson power steering pump and its brackets for an LA 360 work on a magnum 360? Looking at crate motors and weighing options. Thanks! J:burnout:

Are there any bolt on subframe connectors for a 1966 Barracuda??

Are the spring perches the same on a 7.25 and an 8.75 axle housing? Thanks J

Both have the same description???? what is the difference? http://chucker54.stores.yahoo.net/axlevent.html

What are people running in their 60s power steering system? chrysler atf?

I have a 66 Barracuda that is leaking fluid pretty badly from the power steering box. Bought a replacement from a gentleman on here that had no problems. Actually looked at what kind of job this is going to be swapping them and I am sad. The car has a 360 with headers that have been banged in...

Looking at getting a set of eaton leaf springs with a 1" or 2" lift for 66 Barracuda. What rear shocks would you recommend running that are a little bit longer than stock replacement length? Also would you opt for heavy duty leafs? Thanks J

Been a pain trying to find a remanufactured power steering box online for a 1966 Barracuda. Does anyone have experience with the firm feel guys? Do you send your box out to them or do they send you a box and you send them your core. Thank you J

Hello all. Curious as to the easiest way to raise the rear end of my 1966 Barracuda about 2". Shackles? more leafs? Any advice appreciated. J:sign3: