Search results for query: *

is there any difference between slant 6 346 and 360 shifting linkage? This sounds crazy but I'm not happy with my floor shifter and want to put it back on the column. I have some linkage but not sure what its from. I have the one from the shifter to the pivot linkage but not the one to the...

If you change out a 727 to a 904 transmission can you use the same driveshaft? I seem to remember one trans is shorter Thanks all

Im putting a 727 back into my 360 Swinger Did some measuring and from the face of the bell housing to the bolt holes in the torque converter measures 9/16 in. From the mounting face of the block to the flex plate is 7/16. The converter is in as deep in the tranny as it will go. So that means...

I have a 727 behind a 360 in a swinger. The trans was just rebuilt by a tranny guy I trust. Its been sitting a couple months as I had to replace a heater core. I took it out yesterday and backed it out to the street put it in drive and when it got to 5 mph the back tires locked. The idle came...

Can a71 dart w/a 727 trans be towed 4 down? Its got 351 gears in the rear if that's a concern

I have a 727 trans with a manual shift body in it. The neutral safety switch was gutted and welded up to make a plug out of it. Is there a reason to modify the safety switch when you manual shift body in? thanks Jim

I'm putting a sure grip in my 8 1/4 I got all the bearing sizes worked out. I know I have to shim up the pinion gear behind the race. Looks like I need about 1/8 in shim does that sound right?. Does anyone have a dimension from a dummy shaft fitted in the carrier bearing race bores to the top...

I'm going to put a 727 with a manual valve body with a B+M ratchet shifter. Do I have to do anything with the kick down linkage or do I just leave it off I've read that the kick down circuit is important to the 727 trans. So what do I need to do? Jim

when you switch a 7 1/4 to a 8 1/4 what do you do with the shocks They'er 90 deg out Jim

Did Mopar make a 8 1/4 clutch type suregrip or just a cone type and are they specific to what size gears they can use? Jim