Search results for query: *

  1. G

    Oil pump??

    New pump missing hole?? Is this a manufacturer defect or a model or year deal
  3. G

    Another cam degree question!!

    I apologize for more confusion on this subject. I am putting together a slant and want to degree the cam. I know some will say it’s not necessary but I want to understand it. I have followed Dutras book. I’m not exactly sure what his instructions tell me? Here’s what I have if someone can...
  4. G

    Mill head or block or both?

    In the process of putting a plan together for my slant. I’ve read a ton on here and the info is priceless. I want to raise the compression on this engine. What determines if you mill the head or the block or both?
  5. G

    Questions after tear down

    So I’m starting the rebuild of my 1972 slant. I believe that this motor has never been touched. Got it out of the car and disassembled today. I pulled the pistons out to clean the carbon off the top (really thick). Also discovered the top ring on three pistons broken. After cleaning I...
  6. G

    Idle issues??

    1972 /6 Scamp all stock. What should the RPM be at curb idle and how much vacume should there be at the distributor? The issue I am having is when driving the car and stopping at a light sometimes it idles very rough like the vac advance is not working. Now that I am using the A/C it will...
  8. G

    /6 replacement starter

    Is there a good replacement starter for a slant out there? Maybe something from a newer model? Mine is the original 72 starter just doesn't seem to have it anymore.
  9. G

    Hot Start problems with Slant

    1972 /6 HEI coil, Pertronics module. Car starts really well cold. Runs perfect while driving but stop for gas or a soda and it is really hard to start. The only way it will start is with a wide open throttle and a long cranking period. Any tips to help would be great. Thanks
  10. G

    Accelerator Cable

    I have spent a little time searching with no luck. Could someone tell me where to look for a new cable for my 1972 Scamp /6. All stock set up
  11. G

    Water pump gasket

    Ok I give up I know this is not as hard as I am making it!! I removed the water pump from my /6 . How do I put the new gasket between the plate that goes against the motor and the pump? Is there a way to remove the plate? Did search for info didnt find what I need Thanks
Back
Top