Search results for query: *

Hey guys, I'll give a little back story on my build then copy and paste what I had put in my thread on the Forced Induction Section. 71 Dart Street/Strip. 360 block bored .060 over with a 4 inch crank making it 414 cubic inches. Aluminum Indy T/A heads. This was built for boost so its right...

I want to start by saying I have searched this topic and read through several tech threads hoping to find my answer before posting. I am replacing my timing cover on my 360 because the current one seems to have a stress crack and is leaking. I know how to assemble the front of a small...

Hello, I can't seem to keep a timing tape on my balancer. This is on a 2001 5.9 magnum swap and I used the stock magnum type balancer. I have tried several different brands of timing tape and none will stay on. Every time I have cleaned the balancer with lacquor thinner let it dry put the...

Ok so this past winter I did a 360 magnum junkyard build. Tore an 80,000 mile magnum 360 down and everything looked great so I left the bottom end alone. Put Mr. Gasket 0.28 head gaskets on to up the compression a bit. Went with the stock uncracked heads and put on the Hughes 1110 springs...

Hey guys I need some advice. My car (71 dart 318) is making a really load beeping sound under the hood when the car gets warm. When I first start it after sitting all night everything is normal with no noise. As the temperature gets to about 200 and the thermastat opens the beeping sound...