Search results for query: *

I have a used aluminum water pump for a big block. I got it in a parts deal so I have no idea if it leaks or not. Looks nice. $25.00 plus shipping. Located in N.E. Iowa

I have a used flywheel neutral balance for a small block. Has a groove wore into it. Can possibly be resurfaced but the groove is pretty deep. Was thinking that someone could use it for an engine test stand. $45.00 plus shipping. Located in N.E. Iowa.

I have a lightly used 440 ignition kit. Worked well when removed. $100 plus shipping. Located in N.E. Iowa

I have a 4 speed removed from a 1969 Dart. Seems to be in good condition. Only removed for a 5 speed conversion for overdrive. located in N. E. Iowa $400

I am selling a good used 187 oil pan. Commonly used for the big block swap into A bodies. It is in pretty good condition ( a few minor dents and dings). Good threads on oil drain hole and plug. Asking $55.00 Located in N.E. Iowa.

I have a very nice used fuel filler tube from a 1967 Barracuda. $40.00 Located in N.E. Iowa.

I am listing an engine for a friend. He bought it for a Dart project and never got around to working on it. It was cast in August 1970 for a 1971 car. Can't make out the vin pad to identify what it came from. Possible warranty block due to the poor stamping. It is a complete engine but has a...

I have a small block transmission that I received in a large parts deal. I have no history on it whatsoever. It has the crossmember still attached. Sold as a core only. I have no clue what it came out of. Comes with converter. Located in N.E. Iowa Need $75.00 for it.

I have a Ford 9" housing that was narrowed to 52" overall length with 43" perches. Work was done professionally with quality welds. Includes aftermarket axles with Mopar 5X4.5" bolt pattern. New bearings on axles. The rear end was never used after being set up. 31 spline axles. 3" axle tubes...

I have a small block distributor from a 1965 - 1966 273. Part #2444795 date code 18 5. Looks to be in good condition but I have not personally used it. Located in N.E. Iowa. Asking $50.00 plus shipping.

I have a nice pair of exhaust manifolds for a 318 A body. They do have pitting. I don't know the casting numbers. Includes the hard to find drivers side heat stove and all hardware. Located in N.E. Iowa. $50.00 plus shipping.

I have a very solid 318/727 from a 1966 Coronet. It is a good runner and driver. Has an Airgap aluminum intake with a new style Holley carb. Chrome valve covers and air cleaner. It has been rebuilt but I do not have any paperwork on it. Newer electronic ignition conversion. I can supply either...

I have a small block 727 that was hooked to a 360. It worked fine when removed 3 years ago. Need $175.00 for it. Located in N.E. Iowa.

I have a matching pair of lower control arms for an A-body without sway bar. They will need to be rebuilt as all used ones do. Located in N.E. Iowa. $35.00 for the pair.

I have a pair of front brakes, hubs, and spindles for sale. Used commonly to replace the weaker 9" brakes and spindles or also used on a variety of disc brake kits. Asking $50.00 for everything. Located in N.E. Iowa.

I have a speedometer removed from a 1966 Dart. I was not able to test it in the car, but I bench tested the speedometer with a stub cable and a drill. Asking $40.00 plus shipping. Located in N.E. Iowa.

I have a set of clutch and brake pedals removed from a 1966 Dart. Rusty, but nothing is frozen. Located in N.E. Iowa. $50.00 plus shipping.

I have a manual steering box removed from a 1966 Dart. Very tight unit. Ready to bolt on. Located in N.E. Iowa. $65.00 plus shipping.

I have a good used center section. 489 housing. 3.55 gears with cone style sure grip. Nice tight unit. Small yoke. Ready to clean up and install. Located in N.E. Iowa Asking $550.00. Can ship anywhere in the U.S. for $90.00 or less depending on your location.

I have a 318 that came from a running and driving 1977 Dodge D150. I drove it home 40 miles with no issues. Good oil pressure and no strange noises. Asking $200.00 for the engine. Located in N.E. Iowa.

I have a small block 727 transmission removed from a 1977 Dodge D150 with a 318 engine. I drove this truck home 40 miles with no issues. Shifted smooth and strong. Fluid is clean. I would clean it up and install new exterior seals before installing. Asking $200.00 for it. Located in N.E. Iowa.

I have a V-8 K-frame for an A body. It is complete as pictured. Steering linkage, control arms, sway bar with links, etc. lower control arm tubes are intact as these are sometimes known to break the welds. I will ship this, but will have to be in 2 boxes and disassembled. $325.00 Located...

I have a never used pair of headers for mounting a big block into an A-body. These cost me $610.00 plus shipping. Never used them. $500.00. Located in N.E. Iowa.

I have a rear axle removed from a 1968 Dart. I had the housing hot-tanked at my machine shop. Everything is in good condition. Small bolt pattern axles. I have everything to install it in your car. Shock plates, bell drums, backing plates and all hardware, etc. this is not some rusty bent-up...

I have kickdown linkage from a 318/904. It includes the transmission arm, rod from arm to pivot, pivot, and upright rod with socket. See picture. Good condition. Located in N.E. Iowa. $35.00

I have a floor shifter removed from a 1967 Dart. It is in OK condition. Some rust and pitting but complete. All of the linkages and pivot mechanism. Cable for push button is broken. Located in N.E. Iowa. $125.00

I have a K-frame removed from a 1967 Dart with a 273 engine. This is a one year item only and is needed to convert a 67 without changing the idler arm. It includes the motor mounts to install a V-8. Good condition. Lower control arm pivot holes are in great shape. Located in N.E. Iowa...

I have a nice pair of exhaust manifolds removed from a 1967 Dart with a 273 engine. Not all pitted up with rust. Includes the pipe flanges. No cracks, chips, or major defects. Heat riser is stuck. Casting number 2465769 & 2780945. Located in N.E. Iowa. $35.00 for both.

I have an Edelbrock carb that was removed from a running and driving big block. Electric choke model. Runs well. Just taken off yesterday. No issues whatsoever. Located in N.E. Iowa. Asking $165.00.

I have a greasy but nice dust shield from a 904 automatic transmission. $20.00 Located in N.E. Iowa.