Search results for query: *

Good condition with all good threads. Just power washed and needs scuffing and paint or polishing. $75.00 shipped lower 48

Good condition with all good threads. Just power washed and needs scuffing and paint or polishing.$125.00 plus ride $125.00 or offer plus shipping!

Holley street avenger 770 vacuum secondaries. Have two power valves and assortment of secondary springs. Too large for my car. Does need rebuild. Have kit but used bowl and plate gaskets to change power valve. I thing some passages on metering plate may need hot tanked. Ran rough at steady...

Like new MP wire set and cap and rotor. Ran on car for about 300 miles. Distributor looks to be original to my 74 Dart small block. Ran smooth just went MSD. Wires will only fit stock steel valve covers. $75 plus ride

Rear diff assembly from 2015 Hell Cat Challenger with 4620 miles. 230MM 3.70 RATIO with anti-spin. Pulled rear half of case off for inspection and will need re-sealed. Axle seals are fine. Came from car with bad clutch. Owner upgraded clutch and rear diff to aftermarket parts. New sells for...

Full set of 318-340 stock rods. Casting numbers 3418645 have been sized and have new bolts not installed. Also have 4 extra rods that have been ground on and two have been bushed. None of the set of 8 have been ground on. $50.00 shipped lower 48

Series 140 part number 3140 fuel filter with changeable cartridge. Sells new for $144.00. It will need cartridge changed out which sells for around $35. Will sell for $40.00 shipped to lower 48.

A-Body lower arms without sway bar tabs. Blasted and painted with Mopar Wheel paint. New N.O.S. bushings part number 1858024 which sell for $28.00 each. Also included is Moog jounce bumpers not shown in pics. Arms are in great shape and not loose. Adjuster blocks and pins have perfect threads...

Mopar Performance SilverStar HID Bulb # P0000HIDD1. I have 4 new in box. $30.00 each shipped!

For sale is new in box Mopar trans master overhaul kit for FWD 41TE transmissions. $70.00 shipped lower 48.

New in box MP # P4510318 big block M1 intake cable bracket. Retails for $76.30 will sell for $55.00 shipped lower 48!

741 open with 2.76 gears. Ran quiet when removed, all teeth look smooth and even. $100.00 SHIPPED LOWER 48

741 open with 2.76 gears. Ran quiet when removed, all teeth look smooth and even. $95 plus ride which should be around $35-$45 lower 48.

P4452761-AE Mopar cam/lifter package new in box. Ordered and then went to larger cam. Specs are .450/.455 268/272 adv dur. Retails for $222.00 will sell for $150.00 plus ride.

Backing plates from 1970 A-Body 8 3/4 for 10x1.75 shoes. Good cylinders, some hardware may be useable. No spreader bars but does have e-brake levers. $40.00 plus ride.

Full exhaust removed from 1969 Charger with 440 and stock manifolds. Less than one year old and in great shape. Manifold to tips. Had to be cut to get home, easy re-weld to install. Not sure of brand of muffler but sounded like flow masters but not very loud. Chrome tips are like new finish...

72-3 340 forged damper, Stamp#3614369. Removed from smooth running 340. Great condition, rubber is still good shape, no dry rot. $35.00 shipped to lower 48

New in package part # P4510054 $20.00 shipped to lower 48

72-3 340 forged damper, Stamp#3614369. Removed from smooth running 340. Great condition, rubber is still good shape, no dry rot. $40.00 plus ride

72-3 340 forged damper, Stamp#3614369. Removed from smooth running 340. Great condition, rubber is still good shape, no dry rot. $65.00 plus ride

Full exhaust removed from 1969 Charger with 440 and stock manifolds. Less than one year old and in great shape. Manifold to tips. Had to be cut to get home, easy re-weld to install. Not sure of brand of muffler but sounded like flow masters but not very loud. Chrome tips are like new finish...

fuel pump for 1984-90 Chrysler turbo or 3.0v6 part number 5217852. This is factory new part that has been in my garage since 1991. $45.00 shipped to lower 48.

Pair of A-body axels. good condition but will need bearings. good studs and splines. they measure 26" end to brg plate. $100.00 prefer local pickup due to size and weight but can ship if willing to pay actual shipping.

I have a pair of good condition sell style drums from a 1970 a body 8 3/4 small bolt pattern. I'm not sure what they are worth but I would be happy with $50.00 for the pair plus shipping.

Erson Chrome valve covers with matching air cleaner. small corision by bolts that should clean up. Great driver condition $30.00 plus ride.

Erson Chrome valve covers with matching air cleaner. Driver condition, small corision by bolts and a minor blems. $30.00 plus ride.

Erson Chrome valve covers with matching air cleaner. Driver condition, small corision by bolts and a minor blems. $30.00 plus ride.

Erson Chrome valve covers with matching air cleaner. Driver condition, minor issues..small corision by bolts and a few blems. $30.00 plus ride.

Hyd S.B. cam just removed from my 340. Engle racing cams model# EP-18HYD .458/.458 260 duration. I also have the lifters but not market for what lobe ran on. car ran fine just refreshing with larger cam. $35.00 shipped within continental U.S. I will post a pic 2/11/14

Erson Chrome valve covers with matching air cleaner. Driver condition, minor issues..small corision by bolts and a few spots. $40.00 plus ride