Search results for query: *

This 4150 base plate was on my Quick Fuel 1050AN 4150 style carb. It might have 5k miles on it. Never exposed to brake clean so the throttle shaft seals are tight. Stainless throttle blades, easy adjust secondary idle speed and convenient vacuum ports await you : D My reason for replacing it...

(16) 440 source RB 3/8 x .065 wall push rods for cup adjuster. These fit well on an undecked 440 with PRW roller rockers. $125 shipped in the lower 48 Made in USA! https://store.440source.com/Pushrods-For-Adjustable-Rockers-_-RB-9180-long-Set-of-16/productinfo/105%2D1009/

New set of PRW PQx 1.5 roller rockers and rocker shaft hold downs. These were mocked up on an engine but I ended up going 1.6 ratio. Never ran or heat cycled. There are no rocker shafts or bolts. $175 shipped in the lower 48 states. PRW states these are good up to 600psi spring pressures.

Washable, reusable 11x5" racing air filter from Randy's Racing Filters+. Does not require oil. Brand new, never bolted on. I paid $205, will ship in the lower 48 for $175. I was planning on using this on my 511" lowdeck with a max RPM 6500rpm. Any questions please ask. Very nice parts made...

I have a new OOTB set of Hooker 5111HKR headers. Hooker Headers 5111HKR Hooker Super Competition Headers | Summit Racing Summit wants $655 Buy these for $400 plus shipping from 97537 Rogue River, OR

I have a new, never ran set of 1-7/8 Southwest Speed (ebay) big block headers. They have been sand blasted and sprayed in flat black VHT Flame Proof paint. No hardware is included. $300 OBO buyer pays shipping.

One used set of TTI 2-1/8" coated chassis headers for Gen2 HEMI. These have very low miles and just two clearance spots. https://www.ttiexhaust.com/TTiHEMI625-218214.cos.htm These are $1091 new. Asking $750 OBO plus shipping from 97537 Rogue River, OR

I have brand new set of new Doug's D452 Headers for big block. The finish has some abrasion but otherwise they are OOTB. No hardware, gaskets or collector adapters included. Buyer pays shipping from 97537 Rogue River, OR Doug's Headers D452 Doug's Headers | Summit Racing Summit wants $791...

I am selling this setup because it is for a tall deck and all of my engines are 400 based. Details: This intake has been extensively ported and has a very nicely installed NOS pro fogger kit with nitrous/fuel solenoids on both banks. These kits are setup to spray anywhere from 175hp-450+ and...

$2500 for everything in the pics. I was going to replace the valves and k liners but these could be run as is. Pressure tested w/ indicators and decks checked good at the local machine shop. These are older heads that have some miles but you won't get into a set of ported -1's and Jesel rocker...

Howdy, Up for sale is a MP electronic ignition conversion kit with upgraded chrome ecu. Dyno time only, owner wanted a MSD rtr setup. I traded this for hours worked and all of my cars have b blocks. $150 shipped with insurance in the lower 48.

This cam came to me in a work-trade deal. I looked up the lobes in the Comp Cams Catalog and they are listed as oval track, marine or endurance. This lobe family is designed for oval track/marine/endurance applications so it will live on the street. It also has a fuel pump eccentric if you...

For sale, 1 Milodon 30931 single external line oil pan with -12 oil line. This oil pan was on a 540 HEMI that the owner detuned and put a reproduction 70-71 HEMI oil pan. I don't think it ever wend down the road. Dyno time and transport/installation wear only. I'd like $250 with the line and...

Two 5 blades and one 7, $35 each plus UPS shipping. Moving, everything must go!

10.5" big block bellhousing to fit 1965 B/C-body, cast #2468370, 4.354" bearing retainer diameter, use with 130 tooth flywheel All holes good, very nice bell. $175 plus UPS shipping. Moving, everything must go!

Summit polished valve covers with a new set of Superformance gaskets and two new breather grommets. I also tapped the valve cover breather bosses for a 10-24 screw instead od the self tapping garbage they send you. $125 shipped and insured in the lower 48. Will put parts box in a box to...

Reproduction 70-71 6 quart HEMI oil pan with dyno time only, never been in a car. Used 3/8 pickup and windage tray included. This is typically b body stuff but I know many of us have multiple cars. Buyer pays shipping and insurance from 97537. Moving, everything must go!

One big block chromed timing cover with passenger side timing mark bracket and one chromed dipstick assembly in very good condition. Dyno time only. Moving, everything must go! $30 plus shipping and insurance to 97537.

One push in breather, two screw in. Small aeea of flange near distributor has been cleareanced which is typical. $40obo plus insurance and shipping from 97537. Moving, everything must go!

Very nice part from the Oregon high desert. The attachment hardware is included. $50 or best offer plus the least expensive shipping we can find. Part is located in Rogue River OR 97537 *Note the small tube is a vent not evaporative emissions control equipment. My mistake in the title.