Search results for query: *

can someone tell me the difference between these cams. one of these will go in my 408, if i go with the hughes i don't have to change springs. hughes: heh 4246 al - 555/569 lift 242/246 dur lsa is 108 lunati voodoo 405 - 533/552 242/252 lsa is 110/106 how will these cams act...

i have a 71 360 block and a set of eddy heads. i would like to get 450hp firm and use the stock crank. i need it to be somewhat street friendly but i have manual brakes so vacuum isn't an issue. i would also like to go with a hydraulic cam if possible. right now i'm running a 3000 stall and 3.73...

i have a 8 1/4 out of a 75 dart sport and need to know how i can figure out what axle i have without tearing it apart. is this possible?

anyone running one of these that tap into the power steering?

i have a bent axle on my 8 1/4 and was thinkin there's no sence replacing it with stock. is this a wise move or is the 8 1/4 weaker in other spots. i was going to cut a ford 9'' or try to find a 8 3/4 but i doubt it's necessary since im only in the 13's and with the changes i'll be making i...

i found a set of edelbrock heads for my 360 and would like to know what you pro's suggest for a cam. here's the details; 75 dart, 9.5:1 with 72cc heads [going to 63cc], rpm intake, 750 demon, mallory ignition, tti headers, 2800 stall, 3:91 gears. i use this car on the street about 70% and...

i'm doing some changes over the winter. one of the changes i was going for was heads but a recent '' cash diversion'' has taken place [ from spending on car to spending on sled] but i'm not willing to give up totally. my plan is some tti headers [from beat to **** headman] and x pipe and a cam...

looking for some suggestions on sum upgrades to a 360. currently i have 9.5:1 compression, stock 1.88 heads with mild pocket porting, crane cam 278 intake .467 lift 290 exhaust .494 lift, performer intake, 750 mighty demon, mallory ignition box, 727 with 3000 stall and 3.91 gears. i do alot of...