Search results for query: *

Very nice condition (NOS?) Edelbrock STR-12 crossram for small block. All bolt holes are good, no heli-coils. Comes with linkage and new top gasket. $3500/obo + shipping. Located in the Seattle area.

There are (5) of the same 90 degree oil filter adapters for 67-76 (to the best of my knowledge). There is (1) for early A-bodies (63-66). $75 each plus shipping from 98274.

Up for sale is a very nice metal fan shroud for 65 and 66 Valiant, Barracuda and Dart with a V8. All hardware included (bolts, cage nuts and B-body brackets). $300 shipped from 98274.

Chrome PCV body w/rust spot ($10) Manual shift pedal pads ($10 both). V8 water neck with bolts ($10). Or $25 for all. Shipping from 98274 is up to the buyer.

Two (one pair) of 65-66 style Commando valve cover fins. Ok condition. $25+ shipping from 98274.

This is a nice original 18” torque drive fan and clutch. All original date stamps, part number and “engine side” are still there. $250+ shipping from 98335.

This Inland shifter is complete and off of a working transmission. Includes all the nuts, bolts, washers, clips, shifter mount, mechanism, handle w/ knob, rods,swivels...everything. The chrome handle has some flaws. Correct for 1966, 1967 and 1968 Barracuda, Dart and Valiant. $300 shipped from...

Nice and clean LD340. One broken carb stud. Nothing else broken. No stripped threads or cracks. Not ported or modified. $300+ shipping from Gig Harbor, WA.

53009376 and 53009377 manifolds with the 2 1/8" outlets. No cracks, but the air port bolts are broken. $50+ shipping. Located in Gig Harbor, Washington.

Pretty nice Carter Thermoquad for a 73 440. I would probably put a kit in it but everything moves free. $250 shipped in the USA. Located in Gig Harbor, Washington.

A good used throttle cable for an early a-body V8. $30 shipped in the USA. Located in Gig Harbor, Washington.

A nice assembly with cable, bracket, all nuts & bolts and V8 specific gas pedal. Fits 63-66 a-body. $100 shipped within the USA. Located in Gig Harbor, WASHINGTON.

This is a used Wilwood rear disc brake kit that was on my Barracuda with an 8 3/4. It is 5 on 4.5" bolt pattern. Worked great, no problems. $250+ shipping from Gig Harbor, WA. Total shipping weight is about 40lbs.

These are new in the box Moog left (K787) and right (K785) lower ball joint assemblies for 62-72 drum brake equipped A-bodies. Amazon sells these for $75 +/- each. I'm selling for $100 for both plus shipping from Gig Harbor, Washington 98335.

Fits Dart, Valiant and Barracuda from 63-66. This one came out of a 65 Dart with a 273. $100+ shipping from Gig Harbor, WA. PM me here.

Gently used set of Doug's headers that fit the 64-66 273-360 powered a-bodies. They were used for a very short time and had some heat wrap on a couple pipes so they have a couple cosmetic blemishes. They're ceramic coated. Also have bolts and gaskets. $550+ shipping from Gig Harbor, WA...

These are the A-body large ball joint Firm Feel tubular a-arms. They have new ball joints, new poly bushings and bump stops. Never even bolted on a car! $300+ shipping from Gig Harbor, WA. http://www.firmfeel.com/tubuca_a.htm

This is a freshly rebuilt Firm Feel Stage 2 power steering box. Has not even been bolted in a car! Comes with a new a-body pitman arm, hose fitting and return valve. The number 2 that is stamped in picture #2 signifies that it is a stage 2 box. http://www.firmfeel.com/powerst.htm . $350+...

Cast iron bell housing for 273/318 64-66. Pretty bare, but it's a place to start. $50+ shipping from Gig Harbor, WA

I have three radiators for sale. I haven't used any of these, so I consider them cores. All have provisions for auto trans. First is a rare 1964 only 19" radiator $100. Second is a 1965 V8 hi alt/AC real thick core (2524962) $75. Third is a 1966 V8 (2582931) $50. All prices exclude shipping from...

Selling off the V8 parts that I collected for my wagon. I have a whole 273 with all the accessories. I made a couple other ads with some misc. parts. The prices are reasonable so let me know what you need and I will PM back. (2) six blade fans pulleys alternator mount exhaust manifolds...

Selling off my V8 parts. Stock 64-66 273 manifolds with the driver side heat shield and studs, washers and bolts. A hipo y-pipe is included. $125+ shipping from Gig Harbor, WA.

Selling off my extra V8 parts since I've sold my wagon. I have 2 pair of 273-318 engine brackets for early a-bodies. $50 per pair plus shipping from Gig Harbor, WA. I also have a pair that have been modified to fit 340-360 into an early-A. I want $75+ shipping for that pair. I'll be listing more...

Carter ball and ball from a 1965 273/auto. All the linkage and butterflies move freely. Nice clean carb for rebuild. $50 shipped in the US from Gig Harbor, WA. PM me for info.

This is a very nice, complete Hurst 4 speed shifter for 64-65 Barracuda, Dart or Valiant. It has the adapter, rods, clips, tabs for the trans, nuts/bolts,mechanism and a nice un-pitted handle. NO BALL! $300 w/shipping included to the US. Gig Harbor, WA. PM me for info.

These engine brackets/motor mounts for 63-66 a-bodies will let you drop a 340 or 360 into your Hotrod. The passenger side has an extra ear welded on for the different bosses on the block. The driver side just needs a couple washers to space it. $135 shipped in the USA from Gig Harbor, WA.

Small block Mickey Thompson valve covers. Painted black, Moroso breather. Nice and clean. $75+ shipping from Gig Harbor, WA. PM if interested.

Inland 4 speed shifter out of a 1966 Barracuda. This is the no-console shifter. Complete as shown, no knob. I think this is correct for some 67&68's too. $150 shipped in the continental U.S.

For 73-76 a-body disc conversion. $25+shipping from Gig Harbor, WA. PM me here.

Chrome is nice, no dents. There is a stain on one of them. $150+shipping from Gig Harbor,WA. PM me here.