Search results for query: *

Looking for an exhaust flange for la 360 with stock heads Anyboby hav an old set of junk headers they could cut one off of or a flange not being used Thanks Bruce

Need hinge covers for 72 Dart with split back bench tried vans and ol'smokie but they both sent b body parts??? Gettin tired of payin return shipping for wrong parts. Prefer black but will paint others Thanks Bruce

Looking for a universal 1 1/2 white face fuel level gauge 0-90 ohm if poss if not others ok Thanks

I need a black headrest for a 72 Dart with split bench only need 1 but will take a pair if good shape. Yes Dart needs a bath Thanks Bruce

I need the lever on the 904 trans that the kickdown linkage attaches to Thanks

Going back to column shift need all the linkage and any mounting brkts 72 Dart 360/904 trans.

Need small block 360 la intake Had a performer on it and it worked with my a/c. Probably need alum as cast would b $$$ to ship, must be the 2176 as there is a performer that is different Thanks

I replaced my ignition switch but the harness connector in the car fell apart. Anyone have a unusable harness they can cut the connector off of? 72 Dart Thanks Bruce

Need door glass driver side 72 dart 2dr hardtop this yr has wing window Thanks Bruce

72 Dart need the adjusting rod that is on the pass side mounts to crossmember also need the metal bracket that the cable goes into Thanks

Does anyone have the 3 wire connector that controls od/lockup on an a500/42rh Thanks Bruce

Need .037 and.040 discharge nozzle for 600 Holley getting a stumble on acc want to try larger nozzle. Thanks Bruce

72 Dart 8 1/4 rear need threaded piece that connects front cable to mid cable also need pieces that connect mid cable to rear Thanks Bruce

Looking for a Dodge raised top camper van late 80's early 90's. Not looking for a motorhome. Close to TX if possible, will travel for the right deal. Bruce

Anyone have the slides that go on the front edge of the door glass. They fit in a hole in the glass. 72 Dart hardtop Thanks Bruce

I need a 1 1/2" white faced sunpro water temp guage, if you have the three set, which is what they normally come in that would be ok. Bruce