Search results for query: *

I have a nice set of coated SBM W2 headers that I will never use and now must buy a set of regular LA headers . These are Jet coated and baked. Looking for 650.00 PLUS shipping from 53104. These are almost 1100.00 new from what I find on the TTI site. Only reason selling is the once strip only...

Due to changes in life I am selling a 904 and Boss Hog Convertor. Both have only 70 miles on them. Convertor has a 2400 stall and both worked fine . Trans has a TCI shift kit and complete rebuild kit in it and had nice firm upshifts. Have just one photo at moment but it all looks like every...

I have a fresh 8.25 with sure grip, 3:21 ratio, Large bolt pattern, backing plates new shoes, Drums, New wheel cylinders , Driveshaft with 70 miles on it (904 trans) and Ubolts with shock mounts for sale as a package. Rear has 40 miles on all new seals and bearings. If going from a 7.25 to a...

Edelbrock 2176,all holes are in good shape. Nice street intake for a 318-360 small block.The manifold needs a good cleaning/media blast but otherwise in great condition. New they run around $260 and I have seen used for $200 I am looking for $175.00 +shipping from 53104.

The second stupidest thing I have ever done has taken another turn and forces the sale of this engine. The engine was built for Biggs Racing here in WI and had less then 30 passes on it when I bought it for what was to be a strip/very little street project. It is now more street and little strip...

I have a Long trans cooler for sale. Rated @18000k gvw so more then enough for what we are doing. I have gone 6 speed so cooler is not needed. Looking for $55 shipped in lower 48.

I have a complete 360 engine on a 67-76 V8 K-member for sale. Engine ran fine when removed and I have pulled the pan to check the bottom end, Found no sludge or build up anywhere in engine.Has very nice motor mounts included. Looking for $350 no shipping unless you send someone to crate and haul...

Not sure if anyone doing a resto on a '71 and up needs one of these but if so it is in great shape and the clamp looks like new. The foam gasket is even reusable. came from a '71 Scamp looking for $25 plus shipping from 53104 Thanks for the ad space, Bruce

I have a left front frame rail that I bought but did not use. The rail has been drilled out properly not "air chiseled" out and I cleaned up the undercoating and covered it with rust encapsulation while it sat in the shop. I am looking for $95 OBRO plus shipping (long object) from 53104. Thanks...

I have a complete P/S set up for sale that is not needed as I have gone HDK on this project. It includes pump,belt,hoses,pitman arm and box. Box is tight and had no leaks when removed. I am looking for $125 OBRO plus shipping from 53104. Most likely shipped in 2 boxes due to weight. Thanks for...

I have a aluminum manual box and adapter for sale. I have gone HDK on this project so no need for this. Came from a Scamp that spent most of it's life at the strip as opposed to the road. The box is very tight and in great shape. Comes with a decent Pitman arm also. Looking for $95 OBRO plus...

Not sure what to ask here but.... K-frame from my '71 Scamp that has new PST lower ball joints,tie rod ends,sleeves,idler arm,pitman arm and good manual steering box. Frame is painted correct black and box is cleaned and painted also. None of this has been used since rebuilt. Mocked up on the...

I have a new set of 2" dropped spindles that have never been down the road. they sell for 440.00+shipping on the net. I'm asking 400.00 OBO shipped in the lower 48. Thanks FABO

I have a new never down the road set of Magnumforce adjustable UCA for sale. Not painted so you can do whatever you like to them. I'm Asking 360.00 shipped lower 48. Thanks FABO.

Came out of my'71 Scamp should fit most '72 and down "A' bodies. Drilled out,cleaned and then covered in Fast Etch to keep off any rust while it sits in the corner. Asking $125.00 + shipping from 53104. THX FABO Bruce

These are older but never mounted fiberglass front fenders.They will take headlights and marker lights. I do not think they are "race weight" fenders due to the reinforcement along the mounting holes on the fenders.Again the project has gotten crazy and I am off in another direction. I have seen...

This is a steel hood with a fiberglass 6 pack scoop. This was on a race car not a show car but is in great shape. All the lips are flat with no rust bulges and the mounting holes for hardware are all intact. Project has just gotten crazy and the hood is being replaced with fiberglass. This is to...

These came off my '71 Scamp. They appear to be heavier duty then stock but not SS springs.Part #80556pn/3373. They weigh close to 40# apiece so would cost some to ship. The front rubber mount was replaced with the 2 piece from Calvert Racing and would need the center piece to put the bolt thru...

I have a complete except for rotors drum to disc set up. UCA,s with new never down the road balls and bushings installed,spindles,backing plates,reman calipers,new pads and hoses. I can get pictures of the pads and hoses if needed, I found those later. This project took a big turn and I can not...

I have a power steering pump,brackets,lines,belt and gear box with pitman arm for sale. I just bought the pump but this project is taking me in a completely different direction at this time.(Don't they all). Not sure where to go on the pricing here as I have never seen anyone selling all...

I have a used but complete set of rear backing plates,shoes,hardware and wheel cylinders for sale. If your going to 4.5 rear axles you need these brakes and plates. Not sure where to price these so I'll go at $65 plus shipping. I have not cleaned them up but they are straight and all there.I...

I have a new in box set of Dyno Max headers with gaskets. Directions states they fit A/C, P/S cars.They have some chips but no dents in them. They have been hanging around here a long time and need to go,look to be 1 5/8 tubes. No reducers in box. 125.00 plus shipping. thanks, Bruce

I have a SB B&M flex Plate for sale. Use with your after Market Convertor. comes with bolts. $70 shipped Cont. USA