Search results for query: *

Here's a couple of electronic ignition tune up parts for that trusty little slant 6. Standard brand replacement item's have the original packaging but was removed and never installed. $10 plus shipping from Bristol Tn. 37620 Thanks FABO

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $75 plus shipping from 37620 Bristol TN. Thanks

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $85 plus shipping from 37620 Bristol TN. Thanks

Early A body V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN. Thanks

This will get you started on converting that early A body to a V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN...

CAT brand bronze gear to press on your big block shaft. Save that roller cam. $45 plus shipping from Bristol Tn 37620

....price drop $60 plus shipping... Here's an alternator armature that I had pushed back in my stash. I'm not sure of the Amp rating but there is a legible part number on the box, if that can be tracked down. $60 plus shipping from 37620. Thanks FABO

Now that gas prices are taking their tole on the car hobby, those earth rotating gear ratios gotta go. Here's your chance to go crusin' by those gas pumps. A nice set of 2.94 ring and pinion gears with a great wear pattern for your 8 1/4. $40 plus shipping from Bristol, TN 37620

I don't see my self doing any more big block projects so here is a set of pulleys. From an ac ps motor in great condition. I primered them thinking I might use them. $40 SHIPPED in the 48 from Bristol, TN 37620. Thanks FABO

This gets you one step closer to that big block A body swap. A 187 oil pan, not a concourse item but in very usable condition. A previous owner has dollied the bottom of the sump a little. Looks like the usual denting that a 45 year old pan gets. I have a pickup tube but I'm not sure it's the...

This is a complete, as removed, 8 1/4 open rear axle. Comes with usual patina from being stored under a Mopar. Someone has installed a set of 3.55 gears for your acceleration pleasure. I acquired this from a parts swap so I haven't had any road time with it personally. Gears look great, brakes...

This is a used reproduction shroud (not sure who made it, can't read the sticker) so it's not had the abusive life of an original ! Just some scuffs, no chips or cracks. Well made and sturdy reproduction. Classic Ind. advertises this for 70-73 B & E 22" radiator. $80 plus shipping. It will be...

I got this unit in a trade so I don't know it's full history, but it seems to be in good condition. Gears look good. 741 case, open with 3:91 ratio. Toss this one in for a quick and cheap pick me up. Be a star with the one wheel peel crowd! Now...this thing weighs 70 pounds, shipping would be...

From the archives of "the build that didn't happen" I have a set of dual MP valve springs good for .500-.610 lift. These are the real deal from Mopar. New in the box, ready for your small block. $100 shipped by USPS lower 48 from Bristol, Tn. 37620

I have a factory rebuilt points type slant six distributor that i got with a bunch of dealer parts. It has new points, condenser, rotor, plastic drive gear and electric lead. It's been stored for a while so there is tarnish spots on the alum housing. Spins free, points open and close. $25 plus...

From the archives of "the build that didn't happen" I have a set of dual MP valve springs good for .500-.610 lift. These are the real deal from Mopar. New in the box, ready for your small block. $140 shipped by USPS lower 48 from Bristol, Tn. 37620

From the archives of "the build that didn't happen" I have a set of dual MP valve springs good for .500-.610 lift. These are the real deal from Mopar. New in the box, ready for your small block. $175 shipped by USPS lower 48 from Bristol, Tn. 37620

I have a factory rebuilt points type slant six distributor that i got with a bunch of dealer parts. It has new points, condenser, rotor, plastic drive gear and electric lead. It's been stored for a while so there is tarnish spots on the alum housing. Spins free, points open and close. $45 plus...

The key items to V8 your early A. Dropped center link and the motor mounts for 273/318. You'll have to do the washer trick for 340/360. Good condition, about 15 pounds ships from Bristol, Tn. 37620 $275 plus shipping. Thanks

This came with a motor trade and I don't have the horse power to support it, I'm more about torque and cruising in my old age. It looks like it was set on the motor but never run. The end rails weren't even sealed and the gasket areas look clean as new. It's a little dirty from sitting...

Doesn't look like I will be using this, maybe you can. 727/A833 slip yoke to fit a 7290 ujoint, aprox. 8 3/8 long. Not new but in good condition. $65+shipping from 37620. Thanks

Build that big block A body you've always wanted to. The 699 has the recess to clear the steering. It has a few small dings as usual, but can be straightened. $100 plus shipping from Bristol, Tn. 37620

These are a little crusty but priced accordingly. These will work fine for a driver. Someone torched the nuts lose and nicked a couple of places but it won't hurt a thing. Located in Bristol, TN 37620 $50 + shipping.

Nice small block bell housing only. '482. All the threads are good except the lower starter hole has some of the first 4-5 threads compromised , not completely gone, just the top crest of the thread. Shown in one of the pics. Use a longer bolt to reach the threads at the bottom and it will be...

This is a factory shifter mechanism, no rods or handle. It has the factory type small hole for the reverse rod. It takes the push in type handle. Everything was disassembled, blasted, inspected and greased with white grease. I epoxy primered and painted everything rather than phosphate...

3515 734 bell housing in good condition. All the threads are good and have been chased with a tap. Clutch fork and bottom shield also. It has the torque shaft bracket, but the ball has been worn away on one side. Needs a good cleaning. $180+shipping from Bristol , Tn . 37620

3515 734 bell housing in good condition. All the threads are good and have been chased with a tap. The fork pivot bracket looks like it has been welded at some point, looks like a good repair. From Brewers site: original 10.5" small block bell housing cast #3515734 to fit 1972-4 A-body (will...

Factory adjustable rocker arms and the cup end push rods. Good shape , these are non banana groove shafts. $125+shipping from Bristol, Tn. 37620

I've got a 72 340 automatic thermoquad, it all seems to be there. The shafts and throttle plates work well and the phenolic body looks good. It looks like it's been sitting for a while, will need to be rebuilt. I got it on a trade, so I haven't had it open. $130+shipping from Bristol, Tn. 37620

Here's a good set of shock plates for 3" tube axles. They've been blasted and painted flat black. $65+shipping from Bristol, Tn. 37620