Search results for query: *

I'm in the process of figuring out what limited slip unit I want to put into my Duster's 8.75", I've been told the best streetable limited slip is the Eaton Detroit Truetrac. Anyone have any opinions? Running a 5.7 hemi stock with a 545RFE trans in a 73' Duster, won't see track like use other...

I relocated the spring perches on a 67' B-body 8-3/4", and pressed out the wheel studs as I didn't want to deal with the LH threaded side, and wanted both to be the same so I pressed the other side out as well. I have an alterkation front suspension, and want the rear wheel studs to match the...

Planning on putting the Alterkation rear triangulated 4-link in my 73 duster, and have an A-body 8-3/4 to put in it. However, I've heard of people putting 8-3/4's from pre-70 B-body cars in instead, as it moves the wheels to a more centered position in the A-body wheel wells. If I'm cutting...

Couldn't really find one forum where this post belonged, but I suppose most of my question has to do with the 518 AT going into a 73' Duster. It has been a long time since I looked into the 518 vs. the 727. But the questions I have are: Does the 518 have the same rear mounting location and...

Has anyone put a physically larger transmission into their 1970+ A-body car? I'm trying to figure out just how much "massaging" the tunnel will need to clear the 545RFE which is significantly wider in the rear than the 727 and the 518. Its going into a 73' Duster...hopefully...

My 8 3/4 has 2.73 gear set no locker and small bolt pattern axles, it is a 489 housing, but other than that no redeeming features. I measured from wheel mounting flange to mounting flange and got almost exactly 54". So I am on the search for other rear ends that will work in its stead, was...

The stock 8 3/4 I have for my 73' duster has the small bolt pattern lugs, So I either want to get new axle shafts with the big bolt pattern or a different 8 3/4. I was told that a few 8 3/4 rearends from other dodge vehicles fill the wheel wells better (and the possibility of larger tires as...