Search results for query: *

I am looking for a few Eagle small block H beam connecting rods in very good usable shape. PM me with what you have. Thank you

I seemed to have misplaced my pinion seal protector for my 489 case 8 3/4 center section. This is the circular piece that slides over the pinion yoke and covers the pinion seal area. Anyone have one I could buy? PM me with what you have. Thanks

A friend is looking for an aftermarket reverse pattern shifter with reverse lockout for his A body A727 equipped bracket car. He is looking for a complete kit with the shifter, cable and brackets for the trans. PM me with what you have.

I am looking for a 69 4 speed AVS carb model 4611S with a date code in the range of December 68 through Feb 69. These I believe would be stamped M8, A9 or B9 on the bottom front left. PM me with what you have. Thank you

I am looking for an aftermarket Ignition box with rev limiter in nice shape. It will be used for a street strip setup. PM me with what you have. thanks

I am looking for a complete 8 3/4 rear brake set up including the backing plates, e-brake cable lever, pad separator piece, ... for a LBP axle conversion. Will consider with our without the drums. Trying to help a friend complete his conversion in Texas. If 8 1/4 LBP 10" parts are the same...

I am looking for 8 of the stock 273 mechanical rocket arm adjusters. Misplaced Hal’s of mine when I took them apart to clean and inspect. Not sure if the slant six adjusters will work but I’d they do I would take those as well. I know I can by aftermarket replacement adjusters and lock nuts...

i am looking for a pair of 1973 to 1976 A body disc brake spindles and the sliding style disc brake caliper mounting brackets. These are for a friends ride in Indiana. Let me know what you have.

Looking for a nice 4611S Carter carb for my 69 340 4 speed project. Let me know what you have. Thanks

I am looking for a single plane aftermarket manifold for a 5.9 magnum build. Let me know what you have.

Looking for both the left and right side emergency brake levers for A body 10 x 1.75" drum brakes from an 8 3/4 A body rear. These is the parts that attaches to the brake pads and the emergency brake cable sluts into. 1969 to 1972 would be the years for the parts that I need.

I need 4 bushed iron rockers for the W2 race heads to complete my set. I need: 2 exhaust part # P4120202 (stamped with 3577074) 1 left intake part # P4120201 (stamped with 3577692) 1 right intake part # P4120200 (stamped with 6577691) PM me if you have any...

I need a nice distribution block (both if there are 2 pieces) for a 1969 4 way drum brake A Body. PM me with what you have.

Looking for a Carter 4611S 4 barrel carb from a 69 4 speed 340. PM me with what you have.

I am looking for an Indy 360-3 intake manifold with oval ports. PM me here with any availability or leads.

I am in need of a small block Lakewood or similar aftermarket bellhousing and block protector plate for my 4 speed project. Please PM me with details. Thanks

Looking for a pair of 8 3/4 housing ends to use on a shortened housing. PM me here. Thanks

I am looking for a new centerforce dual friction clutch disc for a 10.5" clutch system. PM me here. Thanks

Looking for a new or used 8 3/4 1350 steel pinion yoke and straps. PM me here. Thanks

I looking for the 2 side adjusters that screw into the sides of the 8 3/4 center section and their locking tabs and bolt. Thanks

Looking for a Milodon or Kevko oil pan and pickup. PM me with details.

Looking for a good used or new Milodon windage tray for small block. PM me with details.

Looking for a new Centerforce 10.5 inch dual friction clutch disc if anyone has one they do not need.

Looking for a new set of SCAT Pro Comp I beam rods or new SCAT or other brand HBeam rods. PM me with information.

Looking for a 360 main stud girdle kit. PM me if you have one you are willing to sell. Thanks

Looking for a set of SCAT I beam or aftermarket H-Beam rods for small block that are ready to run. PM me with details. Thank you

looking for a set of forged dished pistons to use in a 4.00 stroke build. PM me here with information.

looking for a cast or forged 4.0 stroke crank for a 360 that is ready to run. PM me here with details. Willing to consider full rotating assemblies (crank,pistons and rods).

I am looking for a complete set of rocker arms, shafts and blocks for W2 race heads or W5 heads. Prefer roller rockers but will also consider bushed non-roller rockers. PM me with information. Thanks

Looking for a hydraulic roller cam for an LA small block. Specs would be in the range of 0.500 lift and 218* to 228*. Preference is for pressed on iron gear vs. bronze. Let me know what you have.